This site shows the new line-up of Panasonic projectors and provides
detailed information for home use and business use projectors.
- A super narrow bezel for seamless large-screen layouts.
- The AG layer scatters light reflected from illumination to reduce glare.
- The durable design enables 24/7 operation.
- The Multi-Screen System dynamically displays images in large spaces.
The super-narrow bezel results in joints that are only 4.9 mm* wide for video wall installations. Even in large-screen configurations, the screen borders can barely be seen, so images are powerful and natural.
* The bezel width varies depending on the model.
For details, see the specifications on the relevant product sites.
The AG layer scatters light reflected from the sun or illumination to reduce glare. This provides greater visibility. It is ideal for use in surveillance stations.
The Multi-Display function enlarges images up to five times their original size, both vertically and horizontally. It enlarges images by the same zoom ratio in both vertical and horizontal directions, such as 2x2, 3x3, 4x4 and 5x5, or by different ratios in order to effectively use vertically or horizontally elongated spaces.
Note: Some degradation occurs when images are enlarged.
Provide an appropriate air-conditioned environment because the ambient temperature varies depending on the installation condition and location.
- The Multi-Screen Support System and Multi-Unit Brightness Control enable projection by combining multiple projectors.
- Low TCO with no lamp or filter replacement (SOLID SHINE model).
- DIGITAL LINK for all-in-one connectivity.
- A durable design with Lamp Relay mode enables 24/7 operation.
The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, color matching and multi-screen processor.
This function automatically corrects the brightness fluctuations that occur over time in the individual projectors of a multi-screen system. Up to eight projectors can be controlled by connecting to each other via a hub, and this can be increased to a maximum of 2,048 projectors by using “Multi Projector Monitoring & Control Software.”
This new light source requires no maintenance for up to 10 years.* In many cases, this means no maintenance until your next refresh cycle. Naturally, there are no lamp burnout problems during use, so reliability is further increased. There is also no filter to clean due to carefully engineered sealed optics. As a consequence, running cost is dramatically lowered because of the savings on lamp costs, maintenance labor and hassle of stocking lamps.
* For the PT-RZ475. With LIGHT POWER set to Eco2.
Replacement of other parts than the light source may be required in shorter period.
Equipped with a DIGITAL LINK terminal, DIGITAL LINK-ready Panasonic projectors or flat panel displays allow the transmission of HDMI, uncompressed HD digital video, and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.
Note: DIGITAL LINK is based on HDBaseT™ technology, but it has other added features, including two-way communication with Panasonic projectors or flat panel displays and interoperability with major AV control manufacturers (Crestron, Extron, Atlona, etc.) and also supports their control protocol.
HDBaseT™ is a trademark of the HDBaseT Alliance.
The Lamp Relay mode operates the lamps alternately to enable 24/7 projection.
The functions vary depending on the model. See and check the functionality of each model.