Panasonic Global
Search Panasonic Global Site
Products
Preliminary
Product Information
PT-DZ870 Series
PT-CW331R Series
Other Product Information
Product Line-up

ISE2013 Preliminary Product InformationPreliminary Product Information Top

  • PT-DZ870 Series
  • PT-CW331R Series

Ultra Short-Throw Projector with Dual Touch Interactive Function and 3D-Ready Design

Main Features

Benefits of the PT-CW331R Series

1 Variety of Functions to Expand Projector Possibilities

  • Mirror projection system enables wide 80-inch screen projection from a short distance of 0.6 m (1.97 ft).*1
  • Equipped with a feedback camera for the interactive function, which enables text, graphics, or lines to be written onto projected images. Two interactive pens come supplied with each projector.
  • Interactive functions feature auto calibration. Two users can work simultaneously with dual pens.
    A faster frame rate and higher sensor resolution also provide smoother, more natural writing.
  • The HDMI input terminal supports 3D (frame packing, side-by-side, top-and-bottom, and frame sequential method).
    Connect a 3D Blu-ray player to the projector to project Blu-ray 3D images.

2 Superb Basic Performance

  • High brightness of 3,100 lm*2 and contrast ratio of 8,000:1*3 ensure bright and easy-to-view image projection in classrooms and meeting rooms.
  • High-output 10 W speaker built-in.
  • Abundant terminals including HDMI and two sets of RGB input terminals.
  • Long lamp replacement cycle of up to 5,000 hours*4 for the PT-CW241R and 4,000 hours*4 for the PT-CW331R/CX301R.
  • Audio can be output from the audio output terminal in Standby mode.*5
  • Compatible with Crestron RoomView™.

3 Convenient Functions

  • The lamp is easily replaced from the side even when the projector is installed on the ceiling.
  • Wall color setting: white, light yellow, light blue, pink, and black board (dark green).*6
  • Projector identification system for remote control allocation of up to six projectors.
  • Security bar for protection against theft.

*1 For the PT-CW331R and PT-CW241R. 0.71 m (2.33 ft) for the PT-CX301R.
*2 PT-CW241R has brightness of 2,600 lm.
*3 During RGB signal input. LAMP POWER: NORMAL.
*4 This is the maximum value when the lamp power is set to Eco mode where the lamp is turned on for 2 hours and off for 0.25 hours.
     If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten.
     In Normal mode, the lamp replacement cycle is 3,500 hours for the PT-CW241R and 3,000 hours for the PT-CW331R/CX301R.
     The usage environment affects the duration of the lamp.
*5 Select the Menu for setting.
*6 The color of images projected onto a color board may vary from those of the original input signal.

Specifications (Tentative)

Model PT-CW331R PT-CW241R PT-CX301R
Power supply 100-240 V AC, 50/60 Hz
Power consumption TBD
(0.5 W with STANDBY MODE set to ECO,*1
6.0 W with STANDBY MODE set to NORMAL)
DLP™ chip Panel size 16.5 mm (0.65 in)
diagonal
(16:10 aspect ratio)
14 mm (0.55 in)
diagonal
(4:3 aspect ratio)
Display method DLP™ chip x 1 DLP™ projection system
Pixels 1,024,000
(1,280 x 800) pixels
786,432
(1,024 x 768) pixels
Lens Fixed/manual focus, F 2.6, f -5.27 mm
Lamp 280 W UHM lamp x 1 240 W UHM lamp x 1 280 W UHM lamp x 1
Lamp replacement cycle 4,000 hours*2 5,000 hours*2 4,000 hours*2
Screen size (diagonal) 1.78-2.54 m (70-100 in),
16:10 aspect ratio
1.52-2.29 m (60-90 in),
4:3 aspect ratio
Brightness*3 3,100 lm 2,600 lm 3,100 lm
Center-to-corner uniformity*3 80 %
Contrast*3 8,000:1
(full on/off, during RGB signal input, lamp power: NORMAL)
Resolution 1,280 x 800 pixels*4 1,024 x 768 pixels*5
Scanning
frequency
HDMI fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz
RGB (analog) fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Keystone correction range Vertical: ±15°
Installation Ceiling/floor, front/rear (menu setting)
Built-in speaker 7 x 3 cm (2-3/4 x 1-3/16 in) (oval) x 1, 10 W (monaural) output power
Terminals HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
COMPUTER IN 1 D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/Scart RGB x 1)
COMPUTER IN 2 D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/Scart RGB x 1)
MONITOR OUT D-Sub HD 15-pin (female) x 1 (RGB x 1)
(The signal selected from computer input 1/2 is output.)
VIDEO IN Pin jack x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
COMPUTER
AUDIO IN
M3 (L-R) x 2
S-VIDEO
AUDIO IN
Pin jack x 2 (L x 1, R x 1)
VIDEO AUDIO IN Pin jack x 2 (L x 1, R x 1)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX,
compliant with PJLink™)
Mini USB x 1 (for interactive function)
Cabinet materials Molded plastic (PC)
Dimensions (W x H x D) 357 x 250 x 367 mm (14-1/16 x 9-27/32 x 14-29/64 in)
(with legs at shortest position)
Weight*6 TBD
Operating noise 37 dB
(Lamp power: NORMAL),
33 dB
(Lamp power: ECO)
35 dB
(Lamp power: NORMAL),
30 dB
(Lamp power: ECO)
37 dB
(Lamp power: NORMAL),
33 dB
(Lamp power: ECO)
Operating temperature 5 °C-40 °C (41 °F-104 °F)*7
Operating humidity 20 %-80 % (no condensation)
Supplied accessories Power cord, power cord cover, wireless remote control unit,
lithium coin cell battery, computer cable, USB cable, interactive pen x 2

*1 When [LAN (Standby)] / [VGA Out (Standby)] / [In Standby Mode (Audio)] are all set to [Off].
*2 This is the maximum value when the lamp power is set to Eco mode where the lamp is turned on for 2 hours and off for 0.25 hours.
     If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. In Normal mode,
     the lamp replacement cycle is 3,500 hours for the PT-CW241R and 3,000 hours for the PT-CW331R/CX301R.
     The usage environment affects the duration of the lamp.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5 Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*6 The above values are averages. May differ depending on the actual unit.
*7 5-35 °C (41-95 °F) when used the places between 762 m and 1,524 m (2,500 ft and 5,000 ft) above sea level.
    5-30 °C (41-86 °F) when used the places between 1,524 m and 3,048 m (5,000 ft and 10,000 ft) above sea level.

Optional accessories

Wall mount bracket
ET-PKC200W

Bracket assembly
ET-PKC200B

Ceiling mount bracket*
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)

* This product is used together with an optional bracket assembly
ET-PKC200B.

Replacement lamp unit
ET-LAC300 (for the PT-CW331R/CX301R)
ET-LAC200 (for the PT-CW241R)

Interactive pen
ET-PEN100

Interactive pointer
ET-PNT100

Top | PT-DZ870 Series | PT-CW331R Series