|
|
 |
 |
|
| |
PT-AE2000 |
| Power
supply |
100–240
V AC, 50/60 Hz |
| Power
consumption |
240 W (Approx.
0.08 W in standby mode with fan stopped) |
| Amps |
2.8 A - 1.2 A |
LCD
panel *1 |
Panel size |
0.74 (17.78 mm) diagonal |
| Aspect
ratio |
16:9 aspect
ratio |
| Display
method |
Transparent LCD panels (x3 R/G/B) |
| Drive method |
Active matrix |
| Pixels |
2,073,600
(1,920 x 1,080) x 3, total of 6,220,800 pixels |
| Lens |
Powered zoom (2x) / Powered focus,
F 1.9 - 3.2, f 22.4 mm - 44.8 mm |
| Lamp *2 |
165 W UHM ™ lamp |
| Brightness *3 |
1,500 lumens *4 |
| Contrast *3 |
16,000:1 *4 (full
on/full off) |
| Center-to-corner uniformity
ratio |
85% |
| Colors |
Full color (1,073,741,824 colors) |
| Projection size |
1,016–5,080 mm (40-200
inches) diagonally, 16:9 aspect ratio |
| Throw distance |
1.2 m -12.0 m (3'11"- 39'4") |
| Resolution |
1,920 x 1,080 pixels |
| Screen aspect ratio |
16:9 (4:3 compatible) |
| Scanning frequency |
RGB |
fH 30–70 kHz, fV 50– 87 Hz,
Dot clock: Less than 150 MHz |
| S-Video/Video |
fH 15.75 kHz fV 60 Hz (NTSC, NTSC4.43, PAL-M, PAL60)
fH 15.63 kHz fV 50 Hz (PAL, PAL-N, SECAM) |
| YPBPR signal
compatibility |
480i (525i), 480p (525p), 576i
(625i),
576p (625p), 720 (750)/50p,
720 (750)/60p, 1,080 (1,125)/24p,
1,080 (1,125)/50i, 1,080 (1,125)/50p,
1,080 (1,125)/60i, 1,080 (1,125)/60p |
| Color
system |
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL 60, SECAM |
| Optical
axis shift *5 |
Horizontal ±40% and vertical ±100% |
| Keystone correction
range |
Vertical: approx. ±30° |
| Installation |
Ceiling/floor, front/rear (menu selection) |
| OSD
languages |
English, French, German, Spanish,
Italian, Chinese, Korean, Russian,
Swedish, Danish, Norwegian, Polish,
Czech, Hungarian, Portuguese, Thai |
| Terminals |
HDMI IN |
Triple - line, 19 - pin HDMI
connector |
| PC(RGB)
IN |
Single - line, D-sub HD
15-pin (female)
R.G.B.: 0.7V [p-p], 75 Ω
G.SYNC: 1.0V [p-p], 75 Ω
HD/SYNC: TTL high impedance, automatic positive/negative
polarity compatible
VD: TTL high impedance, automatic positive/negative polarity
compatible |
| COMPONENT IN |
Y, PB/CB, PR/CR: Single - line, RCA pin jack x 3
Y: 1.0V [p-p] (including sync), 75 Ω
PB/CB, PR/CR: 0.7V [p-p], 75 Ω |
| S-VIDEO
IN |
Single - line, Mini DIN
4p Y: 1.0V [p-p], C: 0.286 V [p-p], 75 Ω |
| VIDEO IN |
Single - line, RCA pin jack 1.0V [p-p], 75 Ω |
| SERIAL |
D-sub 9-pin x 1 (RS-232C based) |
| Power
cord length |
3m (9'10") |
| Cabinet
material |
ABS/PC |
| Dimensions *6 (W x H x D) |
460 x 130
x 300 mm (18-3/32" x 5-3/32" x 11-25/32") |
| Weight |
7.2 kg (15.9
lbs.) |
| Operating
environment |
Temperature:
0° - 40°C (32° - 104°F)
Humidity: 20% - 80% (no condensation) |
| Remote control
unit |
Power supply |
3 V DC (AA type battery x 2) |
| Operation
range |
Approx. 7 m (23') when operated
from directly in front of the signal receptor |
Dimensions
(W x H x D) |
52 x 200
x 28.5 mm (2˝ x 6-15/16˝ x 7/8˝) |
| Weight |
170 g (6 oz.) (including batteries) |
| Supplied
accessories |
Power cord,
Wireless remote control unit, Batteries for remote control (AA type x
2) |
| Optional
accessories |
ET-LAE1000 |
Replacement
lamp unit |
| ET-PKE1000S |
Ceiling mount bracket |
| ET-PKE2000 |
Ceiling
mount bracket for high ceilings |
| ET-PCE2000 |
Cable cover |
| *1: |
The projector uses a type of liquid crystal
panel that typically consists of millions of pixels. This panel is
built with very high-precision technology designed to provide one
of the finest possible images. Occasionally, a few pixels may remain
turned on (bright) or turned off (dark). Please note that this is
an intrinsic characteristic of the manufacturing technology that
affects all products using LCD technology. |
| *2: |
The projector uses a high-voltage mercury lamp
that contains high internal pressure. This lamp may break, emitting
a large sound, or fail to illuminate, due to impact or extended use.
The length of time that it takes for the lamp to break or fails to
illuminate varies greatly depending on individual lamp characteristics
and usage conditions. |
| *3: |
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. |
| *4: |
In AI mode, with dynamic iris on. |
| *5: |
Shift range is limited during simultaneous horizontal and vertical shifting. |
| *6: |
Excluding protrusions |
|
