|
|
 |
 |
|
|
PT-AX200 |
| Power
supply |
100–240
V AC, 50/60 Hz |
| Power
consumption |
290 W (0.08
W in standby mode with fan stopped) |
| Amps |
3.5 A - 1.5 A |
LCD *1
panel |
Panel size |
0.7 (17.78 mm) diagonal |
| Aspect
ratio |
16:9 aspect
ratio |
| Display
method |
Transparent
LCD panels (x3 R/G/B) |
| Drive method |
Active matrix |
| Pixels |
921,600 (1,280 x 720) x 3, total
of 2,764,800 pixels |
| Lens |
Manual zoom (2x) / Manual Focus,
F 1.9-3.1, f 21.7-43.1 mm |
| Lamp *2 |
220 W UHM lamp |
| Brightness *3 |
2,000 lumens *4 |
| Contrast *3 |
6,000:1 *4 (full
on/full off) |
| Centre-to-corner uniformity ratio |
85 % |
| Projection size |
1,016 - 5,080
mm (40–200 inches) diagonally, 16:9 aspect ratio |
| Throw distance |
1.2–12.4 m (3'11" - 40'8")
(16:9 aspect ratio) |
| Resolution |
1,280 x 720 pixels (1,920 x 1,080 pixels with compression) |
| Colors |
Full color (1,073,741,824 colors) |
| Scanning frequency |
RGB |
fH 30–70 kHz, fV 50– 87 Hz
Dot clock: Less than 150 MHz |
| YPBPR signal
compatibility |
480i (525i), 480p (525p), 576i (625i), 576p (625p),
720(750)/50p, 720(750)/60p,
1080(1125)/24p, 1080(1125)/50i, 1080(1125)/50p,
1080(1125)/60i, 1080(1125)/60p |
| S-Video/Video |
fH 15.75 kHz, fV 60 Hz (NTSC, NTSC4.43, PAL-M, PAL60)
fH 15.63 kHz, fV 50 Hz (PAL, PAL-N, SECAM) |
| Color system |
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL 60, SECAM |
| Optical
axis shift *5 |
Horizontal: ±25%, vertical: ±63% |
| Installation |
Ceiling/floor, front/rear |
| OSD languages |
English, French, German, Spanish, Italian, Chinese, Korean, Russian, Swedish, Danish, Norwegian, Polish, Czech, Hungarian, Portuguese, Thai |
| Keystone correction
range |
Vertical: approx. ±30° |
| Terminals |
HDMI
IN |
Dual - line, 19-pin HDMI
connector |
| PC(RGB)
IN |
Single - line, D-sub HD
15-pin (female)
R.G.B.: 0.7V [p-p], 75 Ω
G.SYNC: 1.0V [p-p], 75 Ω
HD/SYNC: TTL high impedance, automatic positive/negative
polanity compatible
VD: TTL high impedance, automatic positive/negative polanity
compatible |
| COMPONENT IN |
Y, PB/CB, PR/CR: Single - line, RCA pin jack x 3
Y: 1.0V [p-p] (including sync), 75 Ω
PB/CB, PR/CR: 0.7V [p-p], 75 Ω |
| S-VIDEO
IN |
Single - line, Mini DIN
4-pin Y: 1.0V [p-p], C: 0.286 V [p-p], 75 Ω |
| VIDEO IN |
Single - line, RCA pin jack 1.0V [p-p], 75 Ω |
| SERIAL
IN |
DIN
8-pin RS-232C compatible |
| Power cord length |
3 m (9´10˝) |
| Cabinet material |
PC + ABS |
| Dimensions *6 (W x H x D) |
395 x 112
x 300 mm (15-17/32" x 4-13/32" x 11-25/32") *6 |
| Weight |
4.9 kg (10.8
lbs) |
| Operating
environment |
temperature: 0°-40°C
(32°-104°F)
humidity: 20%–80%
(no condensation) |
| Supplied accessories |
Power cord, Wireless remote control unit, Batteries for remote control ( AA type for North/South America, R6/LR6 type for Europe / Asia) x 2 |
| Optional
Accessories |
Replacement lamp: ET-LAX100
Ceiling mount bracket: ET-PKX200
Serial adapter: ET-ADSER (DIN 8-pin/D-sub 9-pin)
Weights and dimensions shown are approximate.
Specifications subject to change without notice. |
| *1: |
The projector uses a type of liquid
crystal panel that typically consists of millions of pixels. This
panel is built with very high-precision technology designed to provide
one of the finest possible images. Occasionally, a few pixels may
remain turned on (bright) or turned off (dark). Please note that
this is an intrinsic characteristic of the manufacturing technology
that affects all products using LCD technology. |
| *2: |
The projector uses a high-voltage
mercury lamp that contains high internal pressure. This lamp may
break, emitting a large sound, or fail to illuminate, due to impact
or extended use. The length of time that it takes for the lamp to
break or fails to illuminate varies greatly depending on individual
lamp characteristics and usage conditions. |
| *3: |
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. |
| *4: |
In AI mode, with dynamic iris on |
| *5: |
Shift range is limited during simultaneous horizontal and vertical shifting. |
| *6: |
Excluding protrusions |
|
