PT-CW230 Series

1-Chip DLPT Projectors PT-CW230/PT-CX200

Superb Performance

High Brightness of 2,500 lm* and a 10 W High-output Speaker

High brightness of 2,500 lm* ensures bright and easy-to-see image projection.
The volume level of the 10 W high-output speaker is enough for meeting rooms and classrooms; you do not need to use an external speaker.
You can make multi-media presentations (including audio presentations).

* Brightness by model: PT-CW230: 2,500 lm, PT-CX200: 2,000 lm

A Maximum 3,000-Hour* Lamp Replacement Cycle and 4,000-Hour** Air Filter Replacement Cycle

A 3,000-hour* lamp replacement cycle and a 4,000-hour** air filter replacement cycle reduce the hassle and the cost of maintenance for a long time, minimizing environmental impact.

•This is the maximum value when the lamp power is set to Eco mode where the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement cycle is 2,000 hours. The usage environment affects the duration of the lamp.
** With the lamp power set to Eco. The usage environment affects the duration of the filter.

ET-LAC100

A Wide Variety of Functions for Easy Setup

Auto Input Signal Search

The Auto Input Signal Search function automatically detects the input signal and selects the input channel based on the signal. This function lets you start a presentation without any complicated setup required.

Input Guidance Function

If the input signal cannot be detected, the Input Guidance function will display connection instructions on the projector screen, for easy setup.

Color-board and Blackboard modes

Color-board and Blackboard modes adjust the colors to provide high-quality projection possible in rooms that don’t have a screen.

Extensive Interfaces with an HDMI Input Terminal

Extensive interfaces, including two sets of computer (RGB) input terminals (one set is switchable to output.)
and an HDMI input terminal, allows a wide range of system configurations.

Quiet 28-dB Design Does Not Interrupt Meetings or Classes

As the quiet design keeps noise levels down to 28-dB*, the sound of the cooling fan is hardly noticeable.
The audience can concentrate on the presentation and the screen images even during quiet scenes.

* When the lamp power is set to Eco and fan control is set to Off. (Non-high altitude setting)

Environmentally Friendly Standby Power Consumption of Only 0.45 W

When Standby mode is set to Eco,* the standby power consumption is low at 0.45 W.
This lowers running costs, and helps to reduce environmental impact.

* Standby mode: Eco. When Standby mode is set to Eco, network functions such as standby on via LAN are not available.
Also, only certain commands can be received for external control using the serial terminal.