PT-DZ570 Series

1-Chip DLP™ Projector PT-DZ570, PT-DW530, PT-DX500
Standard Setting-up Positions
  PT-DZ570

Standard setting-up positions
unit : mm (inch)

L: Distance to screen
H: Height from the edge of screen to center of lens

* Adjustable in 40 mm (1-9/16˝) steps.

NOTE:
Illustrations show the projector installed using optional ceiling bracket.
This illustration is not drawn to scale.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 16:10)


NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.

Projection distance (screen aspect ratio 16:9)Projection distance (screen aspect ratio 16:9)

NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.


Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 16 : 10
minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0320 - 0.0546
L (m) = (diagonal screen size in inches) x 0.0638 - 0.0408

Aspect ratio 16 : 9
minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0329 - 0.0546
L (m) = (diagonal screen size in inches) x 0.0656 - 0.0408

NOTE:
Distances calculated with the above equations will include a slight error.
  PT-DW530

Standard setting-up positions
unit : mm (inch)

L: Distance to screen
H: Height from the edge of screen to center of lens

* Adjustable in 40 mm (1-9/16˝) steps.

NOTE:
Illustrations show the projector installed using optional ceiling bracket.
This illustration is not drawn to scale.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 16:10)


NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.

Projection distance (screen aspect ratio 16:9)


NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.


Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 16 : 10
minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0336 - 0.0546
L (m) = (diagonal screen size in inches) x 0.0670 - 0.0408

Aspect ratio 16 : 9
minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0346 - 0.0546
L (m) = (diagonal screen size in inches) x 0.0689 - 0.0408

NOTE:
Distances calculated with the above equations will include a slight error.
  PT-DX500

Standard setting-up positions
unit : mm (inch)

L: Distance to screen
H: Height from the edge of screen to center of lens

* Adjustable in 40 mm (1-9/16˝) steps.

NOTE:
Illustrations show the projector installed using optional ceiling bracket.
This illustration is not drawn to scale.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 4:3)


NOTE:
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.


Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 4 : 3
minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0313 - 0.0546
L (m) = (diagonal screen size in inches) x 0.0624 - 0.0408

NOTE:
Distances calculated with the above equations will include a slight error.