This site shows the new line-up of Panasonic projectors and provides
detailed information for home use and business use projectors.
Remarkably high brightness*1 and high contrast*2 have been achieved in a compact, easy-to-carry body, weighing only 2.99 kg (6.59 lb.) or less.*3
Bright, clear images enhance a variety of viewing situations and applications.
*1 Brightness by model: PT-LW25H: 2,500 lm, PT-LX30H: 3,000 lm, PT-LX26H/LX26: 2,600 lm, PT-LX22: 2,200 lm
*2 Contrast ratio by model: PT-LW25H: 3,000:1, PT-LX30H/LX26H: 2,500:1, PT-LX26/LX22: 500:1
*3 Weight by model: PT-LW25H/LX30H/LX26H: approx. 2.99 kg (6.59 lb.), PT-LX26/LX22: approx. 2.90kg (6.39 lb.)
These handy portables offer a lamp replacement cycle of up to 4,000 hours*1 for extended, maintenance-free use.
The three-layered air filter, in which each layer contains a different mesh size, also achieves a replacement cycle of up to 4,000 hours.*2
This reduces maintenance hassles for long periods of use, and helps to lower maintenance costs and reduce environmental impact.
*1 This is the maximum value when the lamp power is set to Eco, with the lamp turned on for 2 hours and off for 0.25 hours. Increases in the lamp
on cycle or extended use with the lamp continuously turned on will shorten the lamp replacement cycle. When the lamp power is set to High or Normal,
the lamp replacement cycle is up to 3,000 hours. The usage environment affects the lamp replacement cycle.
*2 With the lamp power set to Eco. The usage environment affects the duration of the filter.
The quiet design keeps noise levels down to 29 dB,* so the sound of the cooling fan is hardly noticeable.
This helps the audience to keep their attention on the speech when someone is giving a presentation or on the
screen images during quiet scenes.
* With the lamp power set to Eco.
When Standby mode is set to Eco,* the standby power consumption is low at 0.47 W.
This lowers running costs, and helps to reduce environmental impact.
* Standby mode: Eco. When Standby mode is set to Eco, network functions such as standby on via LAN are not available.
Also, only certain commands can be received for external control using the serial terminal.