Multi Window Processor ET-MWP100G

Flexible Window Layout

  • Dedicated “Control Software for Multi Window Processor” supplied.
  • Single or multiple output layouts and multiple canvases.
  • Simultaneous use of multiple layouts and canvases.
  • One or more windows (PinPs) on each canvas with 360° rotation of each window.
  • Edge Blending function for projectors.
  • Bezel area adjustment capable for flat panel displays.

Output Pattern Examples

A single image can be presented across multiple displays. Window layers can also be displayed.

Flat displays with different screen sizes can be set as a single “canvas,” and the image can be displayed at the same scale throughout.

An integrated screen can combine LCD displays and projector screens

Layout and Canvas Concept
How the Layout and Canvas Work

Extensive Connectivity

  • 16 interface board slots.
  • Easy addition and replacement of optional interface boards.*
  • Capable of up to 28 inputs with the ET-MCYDV100 DVI-U and ET-MCYSD200 3G-SDI boards.
  • Capable of up to 56 inputs with the ET-MCYSD210 HD-SDI board.
  • Capable of up to 28 outputs with the ET-MCQDV150 DVI-U board.
  • Capable of up to 28 outputs with the ET-MCQDL350 DIGITAL LINK board. DIGITAL LINK is an original function added to HDBaseT™ technology allowing transmission of HDMI, uncompressed HD digital video, audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher.
    For details on other manufacturers' equipment,
    see the list of tested equipment compatible with DIGITAL LINK.
Equipment Compatible with DIGITAL LINK

* Ask a qualified technician or your dealer when installing or removing this product.
Note: HDBaseT™ is a trademark of the HDBaseT Alliance.

Ideal for Long-Term Operation

  • Low power consumption of max 160 W* with 16 interface boards mounted.
  • An optional power supply unit ET-RPS100G for dual power supply which can prevent power disconnection.

* When using a single power supply unit.

Application Example

Control Room Featuring the PT-RZ575 and PT-RZ475 SOLID SHINE Projectors

The low power consumption of the ET-MWP100G helps to reduce the total cost of ownership (TCO). Reliability is also increased by mounting the optional ET-RPS100G power supply unit as a power backup. Combining this with the PT-RZ575/RZ475 for 24/7 operation is recommended for surveillance or observation use where high reliability is demanded.

Rear projection multi-screen
PT-RZ575 Product Information
PT-RZ475 Product Information

Broadcast Studio Featuring the PT-DZ870 DLP™ Projectors

The ET-MWP100G’s optional interface boards support a wide variety of input sources. This makes it possible to connect to media servers, professional video cameras, and other devices. DIGTAL LINK compatibility also allows the input signals from these devices to be output to the PT-DZ870 over a single LAN cable.*

Multi-screen projection system

* CAT5e (STP) cable or higher.

PT-DZ870 Product Information

Digital Signage Featuring Video Wall LCD Displays

Incorporating the ET-MWP100G into this system allows a variety of content to be displayed with a highly flexible layout. It brings powerful impact and appeal to digital signage.

Video wall
LFV Series Displays Product Information

Staging and Events Featuring High-Brightness Projectors and Flat Panel Displays

Configuring a system with the ET-MWP100G enables flexible combinations with a host of input devices and displays to match applications like exhibitions, live staging, and video conferences.

Integrated display / projection system
Professional Displays Global Site

System Connection Example

* Required to connect each output terminal of the ET-MWP100G with each projector or flat panel display.
Up to 28 projectors can be simultaneously output via DIGITAL LINK when the ET-MCQDL350 DIGITAL LINK board mounted.
This illustration is intended only to show display patterns. These patterns cannot all be simultaneously output.


Model ET-MWP100G
Power supply 100-240 V AC, 50/60 Hz
Power consumption 160 W max. (180 W with the ET-RPS100G)
Board mounting slots 16 slots (including two dedicated input slots and two dedicated output slots)
with the
SDI 3G-SDI [Level A YPBPR 4:2:2 10-bit] SMPTE ST 424 compliant:
1125 (1080)/60p, 1125 (1080)/50p
with the
SDI HD-SDI SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit]
750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i,
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/30p
SD-SDI SMPTE ST 259 compliant, [YPBPR 4:2:2 10-bit]
525i(480i), 625i(576i)
with the
DVI-U (digital) fH: 15.6-82.2 kHz, fV: 24.0-85.1 Hz, dot clock: 25.2-162 MHz
RGB fH: 15.6-82.2 kHz, fV: 24.0-85.1 Hz, dot clock: 162 MHz or lower
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC], fH: 15.63 kHz, fV: 50 Hz [PAL]
Terminals SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN RJ-45 x 1 for external control, 100Base-TX/10Base-T
USB Type A x 1 (front), Type B x 1 (rear), for service
Dimensions (W x H x D) 482 x 177 x 313 mm (18-31/32 x 6-31/32 x 12-5/16 in)
Weight*1 Approximately 9.6 kg (21.16 lbs) (when optional devices are mounted)
Operating environment Operating temperature: 0-40 °C (32-104 °F)*2,
operating humidity: 10-85 % (no condensation)
Supplied accessories Power cord (x 3), software CD-ROM
(Control Software for Multi Window Processor)

Optional Interface Boards

Model ET-MCYDV100
DVI-U IN   DVI-U 29-pin x 2
Digital DVI 1.0 compliant, compatible with HDCP, for single link only
525i (480i),*3 625i (576i),*3 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p,
VGA (640 x 480)-WUXGA*4 (1,920 x 1,200), compatible
with non-interlaced signals only, dot clock: 25-162 MHz
RGB R, B: 0.7 Vp-p, G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms HD,
VD/SYNC: TTL, high impedance, positive/negative automatic
YPBPR(YCBCR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
S-Video Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Video Y: 1.0 Vp-p, 75 ohms
Model ET-MCYSD200
SDI IN   BNC x 2
3G-SDI SMPTE ST 424 compliant
HD-SDI SMPTE ST 292 compliant
SD-SDI SMPTE ST 259 compliant
Model ET-MCYSD210
SDI IN   BNC x 4
HD-SDI SMPTE ST 292 compliant
SD-SDI SMPTE ST 259 compliant
Model ET-MCQDV150
DVI-U OUT   DVI-U 29-pin x 2
Digital DVI 1.0 compliant, compatible with HDCP
Model ET-MCQDL350
LAN RJ-45 x 1 for network connection, 100Base-TX/10Base-T

*1 Average value. May differ depending on models.
*2 At altitudes of 1,400 m (4,593 ft) or more, the operating temperature range is 0°C to 35°C (32°F to 95°F).
*3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
*4 Compatible with VESA CVT-RB (Reduced Blanking) signals only


1. Do not install the ET-MWP100G in locations that are subject to excessive water, humidity, steam, or oily smoke.
Doing so may result in fire, malfunction, or electric shock.

2. Never place objects on top of the ET-MWP100G while it is operation.

3. There may be a limited number of interface boards for output that can be installed to the ET-MWP100G
because of the number of interface boards for input that are installed.
For more information, refer to the “Notification Regarding Restrictions.

4. If you wish to use the DVI-U board ET-MCYDV100 with the ET-MWP100G, the firmware version of the ET-MWP100G must be V1.19500 or later.
For more information, refer to the “Notification.

5. The signal band that the ET-MWP100G can process is restricted.
And if the Bandwidth total exceeds 7,200 Mbps, this will result in a reduced frame rate for the output video image.
Please use the “Bandwidth Calculator for ET-MWP100G” tool to calculate bandwidth totals.

Dimensions unit: mm (inch)


Note: Photo shows the ET-MWP100G with optional interface boards and an additional power supply unit mounted.

Optional accessories

Interface Board

DVI-U Board (2 inputs for DVI-U)

3G-SDI Board (2 inputs for 3G/HD/SD-SDI)

HD-SDI Board (4 inputs for HD/SD-SDI)

DVI-U Board (2 outputs for DVI-U)

DIGITAL LINK Board (2 outputs for DIGITAL LINK,
a LAN connector jack for serial control and network connection)

Power Supply Unit

Power Supply Unit (Additional unit for backup)