Main Contents begins from here.


Network Camera

Faq Contents

When setting up the camera using the Setup CD-ROM, the IP address is not displayed in the camera list. [Troubleshoot: C10]

Answer... Reason
*You may be accessing the camera over the Internet (WAN) instead of over the LAN.
Access and setup the camera using a computer that is connected to the same LAN as the camera.
*The computer's IP address is not set.
Confirm that the computer's IP address is set correctly, and set the IP address if necessary. (The setting will depend on whether or not the computer is connected to a broadband router.)
*The firewall feature of the computer may be enabled (due to virus software being run on the computer, for example).
Disable the firewall or any virus software on the computer while setting up the camera; enable it after camera setup is complete.

Banner area begins from here.