Main Contents begins from here.

Support

Network Camera

Faq Contents


The camera can not be set up using the Setup CD-ROM. [Troubleshoot: C10]
(2005/10/13)

Answer... Reason
*20 minutes may have passed since the camera was turned on.
Disconnect and reconnect the AC adaptor, then follow the steps described in the Getting Started manual and setup the camera again.
 
*The camera's IP address is also assigned to another camera (the same address is assigned to 2 cameras).
If more than one camera is installed, turn on the cameras one at a time, allowing some to pass before turning on the next camera.

Banner area begins from here.