Main Contents begins from here.

Support

Network Camera

Faq Contents


My Network Camera is connected to the same network as my PC, but the Setup CD cannot find the camera on the network. [Setup: Network]
(2005/10/13)

Answer...
  1. The Setup CD cannot identify a Network Camera if more than 20 minutes pass after the Network Camera is powered up. If 20 minutes have elapsed since the power was turned on, turn the camera off then on again, and then try to find it on the network with the Setup CD once again.
     
  2. On the Setup CD, [Network Configuration] must be set to “Enable”. If the IP address of the Network Camera is not known, push the CLEAR SETTING button to reset the camera to the factory defaults. The camera’s IP address will become 192.168.0.253.


Banner area begins from here.