Main Contents begins from here.

Support

Network Camera

Faq Contents


What are the functions of each of the External I/O pins? [External_IO]
(2006/03/16)

Answer...
Pin Function
1 GND
2 DC Power Output Terminal
 
1) KX-HCM230 and KX-HCM270
  • 12 -16 V DC
  • Maximum load of 100 mA.
 
2) KX-HCM10 and KX-HCM8
  • 8 - 12 V DC
  • Maximum load 50 mA.
3 External Sensor Input
 
  • This is an open collector output circuit.
4 External Device Control Output
 
  • This is an open collector output circuit.
  • On the External Output Control window, you can control the external device to open or short-circuit. Refer to “Setting of External Output Control” in the Operating Instructions.
 
1) KX-HCM230, KX-250, KX-HCM270, KX-HCM280
  • The maximum draw current is 100 mA.
  • Maximum input voltage is +20 V DC.
 
2) KX-HCM10 and KX-HCM8
  • The maximum drawing-in current is 50 mA.
  • Maximum input voltage is +15 V DC.

1. The External Device Control Output and External Sensor Input are independent of each other. Signals sent from the External Sensor Input can not automatically switch the External Device Control Output.
 
2. Configure the setting outside of Network Camera, if needed.

 


Banner area begins from here.