Main Contents begins from here.

Support

Network Camera

Faq Contents


The Setup Program will not set up the camera. [Troubleshoot: BB_HCM3xxcameras]
(2005/07/29)

Answer... [Cause1]
More than 20 minutes have passed since the camera was turned on.
[Solution1]
Turn the camera off, and then turn it on again. Refer to the Setup Guide and set up the camera.

[Cause2]
IP addresses of two or more cameras are overlapping.
[Solution2]
If you are installing more than one camera, turn on one camera and set up that camera before turning on the next camera.

[Cause3]
A network error may have occurred during setup.
[Solution3]
Confirm that your network is working. Make sure that all the LAN cables are connected properly and that your router is turned on and functioning properly, then setup the camera again.

Banner area begins from here.