Main Contents begins from here.

Support

Network Camera

Faq Contents


The image from network cameras is not visible. [Troubleshoot: BL_WV10]
(2005/08/01)

Answer... [Cause]
During Quick Setup, the BL-WV10, after obtaining network data from the router, will seek out an IP address not currently in use for its own fixed IP.
In addition, there are fixed IP addresses for cameras on which Quick Setup was performed.
If the same IP address is chosen after Quick Setup, this will cause network problems.

[Solution]
Either change the IP settings for one of the duplicate IP devices and the network settings for the BL-WV10 and the camera(s), or re-perform Basic Setup after resetting the default settings for the BLWV10 and re-initializing the camera(s).

Banner area begins from here.