Main Contents begins from here.

Support

Network Camera

Faq Contents


The camera cannot be registered automatically on the Camera Portal page. [Troubleshoot: HGW600] [Troubleshoot: BB_HGW700]
(2004/10/06)

Answer...
  • The camera will not be registered automatically if the FACTORY DEDAULT RESET button is pressed while this product is booting up (within 30 seconds after turning on this product).
    Press the FACTORY DEDAULT RESET button again.

  • Make sure Enable is checked on the Network window of Network Camera ([Network]->1. Network Configuration from the Setup Program).

  • The IP addresses "192.168.0.113 - 192.168.0.128" are used for the Automatic Setup function. If the other devices use the corresponding IP addresses, change the other IP addresses.


Banner area begins from here.