Main Contents begins from here.

Support

Network Camera

Faq Contents


The network camera that is in the local network is not displayed in the setup program. [Setup: Network] [Troubleshoot: KX_HCM]
(2003/12/10)

Answer... There are two reasons.
  1. When the network camera is on for over 20 minutes, it is impossible to display. If needed, you should restart the network camera.

  2. There is possibility that you didn't check "setting is enable from setup program" on setting page. If you don't know IP-address, you should factory reset the camera.


Banner area begins from here.