Support > Consumer Products > Home Communication > HD-PLC Adaptor > FAQs
Main Contents begins from here.
Support
HD-PLC Adaptor
FAQs
Category
[No.1 - No.13] / 1
--- ALL FAQ: 13 item ---
[No.1 - No.13] / 1
| No.1... | Easy to Setup 'press the setup buttons to configure...' Should I push two(2) buttons? |
| No.2... | If there are many IP communication, the throughput per stream may be down. |
| No.3... | The easy-setting might be failed depends on AC extension cord. |
| No.4... | What is PLC might give obstructions to? |
[PLC Adaptor :Troubleshooting]
| No.5... | How can I determine if I need to contact the call center to ask to repair the PLC unit. |
| No.6... | PLCs can not link. Registration information has been cleared. |
| No.7... | When I use Repeater Hub/Shared Hub with PLC, the performance seems down. |
| No.8... | Although PLC-LED of MASTER lights, the PLC doesn't communicate. |
| No.9... | Although PLC-LED of Terminal lights, the PLC doesn't work. (MASTER LED turns off) |
| No.10... | The performance of network fell remarkably. On capturing packets, the same packets are consecutive in short time. |
| No.11... | When I reactivate MASTER, TERMINAL LED was turn off, then light. |
| No.12... | TERMINAL can not be registered to MASTER. When I push 'SETUP' button of TERMINAL.. The PLC-LEDs of TERMINAL blink sequentially one by one. |
| No.13... | The transmission speed seems low. |
[No.1 - No.13] / 1
Banner area begins from here.
Sub Menu begins from here.
Support > Consumer Products > Home Communication > HD-PLC Adaptor > FAQs