Main Contents begins from here.
Products & Solutions
HD-PLC Ethernet adaptor
Use your home's power outlets as LAN ports
(1) PLC Indicator
Lights to indicate that the adaptor is connected to the HD-PLC network.
(2) LAN Indicator
Lights when a LAN cable is connected to the adaptor, and flashes when data is being sent or received.
(3) Master Indicator
Lights when the adaptor is configured as the master.
(4) Setup Button
Used to register the adaptor or test the terminal's network speed.
(5) Factory Default Reset Button
Used to reset the adaptor and erase its registration.
(6) LAN Jack
Connects the adaptor to a network device, such as a broadband router, hub, computer, etc.
(7) Mode Selector
The position of this selector during registration determines whether the adaptor is used as the master or as a terminal.
HD-PLC Ethernet Adaptor
|UDP: Max. 90 Mbps
TCP*2: Max. 65 Mbps
no. of adaptors per network*3
|16 ( including the master)|
no. of network devices
connected to an adaptor*4
|8 (when using a switching hub)|
|Standard||IEEE 802.3/IEEE 802.3u|
|Interface||10Base-T, 100Base-TX, Auto MDI/MDI-X|
|Protocol||IPv4 / IPv6 / TCP / UDP|
|Operational environment||0–40 °C (32–104 °F)
20%–85% humidity (without condensation)
|Dimensions (W x D x H)||Approx. 55 mm x 33 mm x 90 mm
(2 3/16” x 1 5/16” x 3 9/16”)
|Weight||150 g (0.33 lb.)|
|Power supply||Input 120 V AC, 60 Hz|
|Consumption||In Normal mode: 3 W,
In Power Save mode: less than 1 W
|Frequency band||2 28MHz|
|Modulation||Wavelet OFDM (16 PAM to 2 PAM)|
|Transmission PHY rate||Maximum 210 Mbps*1|
|Access method||CSMA / CA|
|Error correction||Reed-Solomon encoder/decoder and
Convolutional encoder/Viterbi decoder
|Encryption||AES 128-bit encryption|
|Communication distance||Approx. 200 m (650 ft.)*2|
Banner area begins from here.
Sub Menu begins from here.