Global Home You are here:Support > containsBusiness & Professional > containsOffice Products > containsNetwork Camera > containsTechnical Information > containsStatus Information for BL-WV10 (non-USA model)


Main Contents begins from here.

Support

Network Camera

Wireless Status

Status Information Description

Please refer to the following information when you confirm the wireless.

Wireless Status of Camera(BL-C230)

Status of Wireless module

Display Meaning
Booting(1xx) Booting wireless module is OK
Booting(2xx) Booting wireless module is NG
-> Failure of wireless module or communication error between wireless module and main PCB.
Booting(300) Re-booted wireless module
Started. Start booting wireless module
No Link to Wireless Router. arow
Linking to Wireless Router. arow
Received the request to change configuration from WEB. arow
Wireless function is now disable because of Wired mode arow

Firmware version (Wireless)

Display Meaning
v4_*_***** Version of Wireless Firmware

Operation mode

Display Meaning
Detecting Detecting mode
Wireless arow
Wired arow

Communication mode

Display Meaning
802.11b/g arow
802.11g exclusive arow
802.11b arow

Channel

Display Meaning
*ch Wireless channel (Default : 1ch)

BSSID

Display Meaning
************ MAC address of router

Authentication Mode

Display Meaning
Open System No Encryption or WEP is selected
WPA-PSK/WPA2-PSK TKIP or AES is selected

Cipher Method

Display Meaning
No Encryption arow
WEP 64bit arow
WEP 128bit arow
WEP 152bit arow
TKIP arow
AES arow

Radio Condition

Display Meaning
Good When the signal strength is 50%-100%
Normal When the signal strength is 15%-49%
Weak When the signal strength is 1%-14%
No connection When there is no signal (0%)

Banner area begins from here.

Global Home You are here:Support > containsBusiness & Professional > containsOffice Products > containsNetwork Camera > containsTechnical Information > containsStatus Information for BL-WV10 (non-USA model)