Main Contents begins from here.
How to enable the router's UPnP feature
This is the general way to enable the router's UPnP feature.
Open the router's configuration web page by typing the router's IP address on your web browser.
Find out the page which enable the UPnP feature.
Save the setting.
Try Network Camera [Automatic Setup] procedure again.
For more information how to enable UPnP for each router model, please refer to the router's manual.
Example: How to enable the UPnP for Linksys WRT54G
(1)Open the router's configuration page at http://192.168.1.1 (Factory Default IP address).
The top page of the router's configuration web page appears.
(2)Click [Administraion] tab on the menu bar.
"Administraion" window appears.
(3)Choose [Enable] for UPnP and click [Save Settings].
The new setting is saved and the window below appears.
Click "Continure" and finish the configuraion. Now your router's UPnP is turned on.
(4)Please try Network Camera [Automatic Setup] procedure again.
Banner area begins from here.
Sub Menu begins from here.