Head on this page.
Professional Displays TOP > 
Product Information > TH-42BT300
| Model | TH-42BT300U | TH-42BT300ER | TH-42BT300W | |
| Display | Screen Size | 41.6-inch | 42-inch | 42-inch |
| Aspect Ratio | 16:9 | |||
| Effective Display Area (W x H) | 921 x 518 mm (36.3" x 20.4") | |||
| Resolution (H x V) | 1,920 x 1,080 pixels | |||
| Pixel Pitch (H x V) | 0.576 x 0.576 mm | |||
| Contrast Ratio | 5,000,000:1 | |||
| Gradation | 12,288 steps (equivalent) | |||
| Panel Life*1 | Approx. 100,000 hours | |||
| FULL HD 3D | FULL HD 3D Ready*2 | |||
| Connection Terminal | Video IN, Audio IN | Video IN, Audio IN | Video IN, Audio IN | |
| Component/RGB IN, Audio IN | Component/RGB IN, Audio IN | Component/RGB IN, Audio IN | ||
| HDMI IN | HDMI IN | HDMI IN | ||
| DVI-D IN, Audio IN | DVI-D IN, Audio IN | DVI-D IN, Audio IN | ||
| PC IN, Audio IN | PC IN, Audio IN | PC IN, Audio IN | ||
| Control Terminal | Serial | D-SUB 9pin x 1 (EXTERNAL CONTROL TERMINAL), RS-232C Compatible | ||
| LAN | RJ45 10 BASE-T/100 BASE-TX, Compatible with PJ Link™ | |||
| 3D Shutter Out | M3 Jack x 1 (for 3D IR Transmitter) | |||
| DC 8V Out for 3D IR Transmitter | Center Plus for EIAJ 4 mm Plug | |||
| Electrical | Power Requirements | 110-127 V AC, 50 Hz/60 Hz |
220-240 V AC, 50 Hz/60 Hz |
|
| Power Consumption | 330 W | 305 W | 305 W | |
| On Mode Average Power Consumption*3 | 170 W | 165 W | 165 W | |
| Power off Condition | 0.2 W | 0.3 W | 0.3 W | |
| Stand-by Condition | Save ON 0.4 W, Save OFF 0.7 W |
Save ON 0.5 W, Save OFF 0.8 W |
Save ON 0.5 W, Save OFF 0.8 W |
|
| Sound | Audio Output | 6Ω, 16 W [8 W + 8 W] (10 % THD) | ||
| Mechanical | Dimensions | 1,020 x 610 x 89 mm (40.2" x 24.1" x 3.5") | ||
| Weight (Approx.) | 26.0 kg (57.4 lbs.) | |||
| Operation Environment | Temperature | 0°C to 40°C (32°F to 104°F) | ||
| Humidity (Non condensation) | 20 % to 80 % | |||
| Altitude | 0 to 2,800 m (0 to 9,100 feet) | |||
| Regional Spec Sheets | TH-42BT300U | TH-42BT300ER | TH-42BT300W | |
*1: Guideline operating hours before the panel brightness is reduced to half when the panel is used to display motion pictures in the Standard mode. Afterimages (burned-in images) and malfunctions are not taken into consideration.
*2: An optional 3D IR Transmitter and 3D Eyewear are required for viewing 3D images.
*3: Based on IEC 62087 Ed. 2 measurement method.