Professional Displays

  • HOME
  • Product Information
  • Case Studies
  • Special Issue
  • Download
  • Contact Information
  • Sitemap

Dimensions

Dimensions

Product specifications

Model TH-65PB1U TH-65PB1E TH-65PB1W
Display Screen Size (Diagonal) 64.7-inch (1,645 mm) 65-inch (1,645 mm) 65-inch (1,645 mm)
Effective Display Area (W x H) 1,434 x 806 mm (56.4" x 31.7")
Number of Pixels 1,920 x 1,080 pixels
Pixel Pitch (H x V) 0.747 x 0.747 mm
Contrast Ratio 5,000,000:1*
Gradation 6,144 steps (equivalent)
Panel Life*2 Approx. 100,000 hours
FULL HD 3D*3 FULL HD 3D Ready
Touch Technology Plasma light detection system
Connection Terminal Video IN, Audio IN Video IN, Audio IN Video IN, Audio IN
Component/Audio IN Component/Audio IN Component/Audio IN
HDMI IN HDMI IN HDMI IN
DVI-D IN, Audio IN DVI-D IN, Audio IN DVI-D IN, Audio IN
PC IN, Audio IN PC IN, Audio IN PC IN, Audio IN
Wireless I/F
Wireless Module (ET-WM200) terminal x 1
Control Terminal Serial D-SUB 9pin x 1 (EXTERNAL CONTROL TERMINAL), RS-232C Compatible
LAN RJ45 10 BASE-T/100 BASE-TX, Compatible with PJ Link™
3D Shutter Out M3 Jack x 1 (for 3D IR Transmitter)
DC 8V Out for 3D IR Transmitter Center Plus for EIAJ 4 mm Plug
Function Slot SLOT2.0 x 1 (Vacant)
Power Requirements 110-127V AC, 50 Hz/60 Hz 220-240 V AC, 50 Hz/60 Hz
Power Consumptions 555 W 510 W 510 W
On Mode Average Power Consumptions*4 Approx. 315 W Approx. 310 W Approx. 310 W
Power Off Condition 0.3 W 0.3 W 0.3 W
Dimensions (W x H x D) 1,554 x 925 x 99 mm (61.2" x 36.5" x 3.9")
Weight Approx. 60.0 kg (132.3 lbs.)
Operation Environment Temperature 0°C to 40°C (32°F to 104°F)
Humidity (Non condensation) 20 % to 80 %
Altitude 0 to 2,800 m (0 to 9,100 feet)
Regional Spec Sheets North America
TH-65PB1U
Europe
TH-65PB1EK
Asia, Oceania, Middle East, South America
TH-65PB1W

*1: The dark-room contrast ratio of the panel unit that can be displayed simultaneously on the same screen. Measured in "Dynamic" picture mode using a white signal in a 4% window.
*2: Guideline operating hours before the panel brightness is reduced to half when the panel is used to display motion pictures in the Standard mode. Afterimages (burned-in images) and malfunctions are not taken into consideration.
*3: An optional 3D IR Transmitter and 3D Eyewear are required for viewing 3D images.
*4: Based on IEC 62087 Ed. 2 measurement method.