Business & Professional > Security Systems > Support > FAQs > FAQs Contents
Main Contents begins from here.
Business & Professional
FAQs Contents
No.141 Factory Default [INITIAL SET]
- Answer141
-
*BL-VT164
- Disconnect DC IN Jack out from camera
- Hold down the Initial Set button
- Connect power adapter using DC IN Jack while holding down the Initial Set button for and release after 5 seconds or more.
- Wait around 3 minutes.
Camera Power Indicator will go off then flash orange, flash green & then to solid green.
*Do not turn off the power of the camera during the process of initialization. Otherwise, it may fail to initialize
and may cause malfunction.[BL Camera] (2012/12/10)
Banner area begins from here.
There may be further contact detail depending on the product category in local web site of each country.
Sub Menu begins from here.
Business & Professional > Security Systems > Support > FAQs > FAQs Contents
