Products & Solutions > Professional AV > Infrared Wireless Microphone System > Hand Held Microphone WX-LT150
Main Contents begins from here.
Products & Solutions
Hand Held Microphone WX-LT150
Infrared Wireless Microphone (Hand Held Type) WX-LT150
For light weight and ease of use,
the WX-LT150 handheld microphone
WX-LT150 is a basic handheld-type wireless microphone created for ease-of-use when delivering a speech.
It is also convenient when passing the microphone back and forth while asking and answering questions.
Light, comfortable design prevents speaker fatigue
The WX-LT150 weighs only 105 grams (without battery). Its lightweight design allows hours of extended use with teaching or in workshops without speaker fatigue.
Uses half the number of batteries of conventional models
One alkaline AA battery provides approximately 5 hours of consecutive operation*. (as compared to conventional models running for about 5 hours on two AA batteries.) This greatly contributes to cost-saving.
* Using LR6EJ Panasonic batteries.
The trouble-free emitter
The emitter is located below the microphone. Relocating the emitter from the grip prevents sound interruption when a hand inadvertently blocks the emitter.
Enlarge Picture
Now with press-to-talk switch
The unit's press-to-talk switch amplifies voice input only while it is pressed.
4 channels supported by single microphone
This microphone adopts PLL synthesized system* which enables to switch among 4 different frequencies in a single microphone. This allows for more flexible use.
* The infrared receiver does not adopt the PLL synthesized system.
 |
Channel switch The channel switch makes it easy to choose from among all four channels. |
External input terminal
This microphone is equipped with an external input terminal that can be used as a transmitter. Sounds from voice recordings in language lessons or business presentations that use a PC, or other audio sources can widely be broadcast via the infrared wireless microphone.
* The microphone cannot be used when connected to an external input.
Runs on one AA size rechargeable battery or an AA size dry cell
Readily available Panasonic AA size rechargeable batteries can be used to power the microphone. *1. The battery can be charged while installed in the microphone. *2. In addition to running the microphone on a rechargeable battery, you can connect it to the optional WX-LZ150 Charger connected to an AC outlet or install an AA size dry cell, which makes for a three-way power supply.
*1 Rechargeable AA size nickel-metal hydride HHR-3M Series batteries (Panasonic Corporation)
*2 WX-LZ150 Charger is required.
- Do not charge any batteries other than Panasonic nickel-metal hydride batteries. Charging other batteries may result in leakage of battery fluid, generation of heat or explosion.
- To charge batteries of other manufacturers, use the dedicated charger.
Clear sound and wide dynamic range
Panasonic developed LSI sound processing technology produces clear sound within a wide dynamic range.
WX-LT150 Specifications
| Infrared Ray Wavelength | 850 nm |
|---|---|
| Number of Transmission Channel | 4 channels (Sub carrier frequencies) (1ch: 2.3 MHz, 2ch: 2.8 MHz, 3ch: 3.2 MHz, 4ch: 3.8 MHz) |
| Oscillation System | PLL Frequency Synthesizer Method |
| Reception Range | Approx. 20 m (Effective reception range 8m in radius from Infrared Sensor WX-LS100) |
| Condition | At the line of sight with using WX-LR100 & WX-LS100 |
| Microphone Type | Unidirectional ECM |
| Frequency Response | 100 Hz  10 kHz (1 kHz standard 50 µs emphasis) |
| External Input Level | -14 dBV Ø 3.5 stereo mini jack (monaural mix) |
| Required Battery | Rechargeable: AA size nickel-metal hydride battery x 1 Dry cell: AA size alkaline battery x 1 |
| Operation Time (at 25 °C, continuous use) |
Approx. 6 hours: using an HHR-3M Series Panasonic AA size nickel-metal hydride battery Approx. 5 hours: using a Panasonic AA size alkaline LR6EJ battery |
| External power supply | DC 3.3 V (supplied from the optional WX-LZ150 Charger) |
| Dimensions | 41mm(W) × 207 mm(H) × 38 mm(L) 1-5/8" 8-1/8" 1-7/16" |
| Weight | Approx. 105 g (without battery) |
| Finish | Microphone head: Black coating Clip: Silver metal coating |
Brochure Download
Banner area begins from here.
Sub Menu begins from here.
Products & Solutions > Professional AV > Infrared Wireless Microphone System > Hand Held Microphone WX-LT150
