Remote commands

You can press dial keys to operate the answering system as explained below, without waiting for the voice guidance to prompt you.
Most models (exceptions listed below)
image
Repeat message (during playback)*1
image
Skip message (during playback)
image
Play new messages
image
Play all messages
image
Play greeting message
image
Record greeting message
image
Stop playback or recording
Repeat voice guidance*2
image
Turn answering system off
image
Turn new message alert off*3
image
Erase message (during playback)
image
Erase all messages
image
Reset to the pre-recorded greeting message (during greeting message playback)
image
End remote operation and end call
*1
If pressed within the first 5 seconds of playback, the previous message is played.
*2
Available for the following models only.
KX-HNB600FR
KX-HNB600FX (available only when [Country / Region] is set to [Polska] or [Magyarorsz])
KX-HNB600GR
KX-HNB600JT
KX-HNB600SL (when the [Voice Prompt] setting is set to [Italiano])
KX-HNB600SP
*3
Available for 10 seconds after listening to new messages.
KX-HNB600, FV-HBVK1, KX-HNB600C, FV-HBVK1-C, KX-HNB600LC, KX-HNB600ME
image
Repeat message (during playback)*1
image
Skip message (during playback)
image
Play new messages
image
Play all messages
image
Stop playback
Start voice guidance*2
image
Turn answering system off
image
Turn new message alert off*3
image
Erase message (during playback)
image
Erase all messages
image
End remote operation and end call
*1
If pressed within the first 5 seconds of playback, the previous message is played.
*2
Available for the following models only.
KX-HNB600, FV-HBVK1 (when the [Voice Prompt] setting is set to [Español])
KX-HNB600LC
KX-HNB600ME
*3
Available for 10 seconds after listening to new messages.

Turning on the answering system remotely

Important:
The answering system must be activated in order to turn it on remotely (Activating the answering system).
1.
Dial your phone number from a touch-tone phone.
2.
Let the phone ring until a long beep is heard.
The number of rings varies by model, from 9–20 rings.
3.
Enter your remote access code within 10 seconds after the long beep.
The greeting message is played back.
You can either hang up, or enter your remote access code again and begin remote operation.