ET-UW100 Firmware Update Tool for Windows

You can update firmware by yourself without any special tool.

Applicable models ET-UW100 (Easy Wireless Stick)
Latest Version

Version 4.0.0.8
Click buttons below to check out version information.
For Windows®

Update information (Version 4.0.0.8)
    • Supports BF1 Series
    • Supports Windows® 8.1

Compatible Display Models TH-80BF1, TH-65BF1, TH-50BF1, TH-80LFB70, TH-65LFB70, TH-50LFB70, TH-80LFC70, TH-65LFC70, TH-50LFC70, TH-65PB2, TH-50PB2, TH-103PB1, TH-85PB1, TH-65PF50, TH-60PF50, TH-50PF50, TH-42PF50

* An update is required for connecting to the LFB70 Series or LFC70 Series, and for using Windows® 8.

System Requirements

The computer must meet the following requirements in order to update the firmware.

OS
Windows Vista®
Ultimate (32 bit/64 bit)
Business (32 bit/64 bit)
Home Premium (32 bit/64 bit)
Home Basic (32 bit/64 bit)
Windows® 7
Ultimate (32 bit/64 bit)
Professional (32 bit/64 bit)
Home Premium (32 bit/64 bit)
Windows® 8
Windows 8 Pro (32 bit/64 bit)
Windows 8 (32 bit/64 bit)
Windows® 8.1
Windows® 8.1 Pro (32/64 bit)
Windows® 8.1 (32/64 bit)
Compatibility of Microsoft Windows Vista®, and Windows® 7
• Microsoft Windows Vista®: SP2 only supported
• Microsoft Windows® 7: SP1 only supported
Interface USB 2.0
CPU At a minimum, the specifications must support operation of the above-described operating systems.
RAM At a minimum, the specifications must support operation of the above-described operating systems.

NOTE:

  • Administrator privileges are required to perform update.
  • Operation via a USB hub is not guaranteed.
  • Operation is not guaranteed when used with system environments other than the above or on homemade computers.
  • Operation is not guaranteed for all computers that meet the above conditions.

Downloading the Software

Download

W_FirmUpdateTool_UW100_4008.exe (5.05MB)

NOTE:
The file name of the update tool will vary depending on the product number and version of the target device.
Select the update tool that corresponds to your target device and the version you want to use.

How to Download

  1. Click the Download button above and the "Software Licensing Agreement" window will appear.
    Select [Agree] and the installer will begin to download automatically.
  2. Once the file has been downloaded, double click W_FirmUpdate_uw100_4008.exe.
    This will uncompress the installation files and create a folder named FirmUpdateTool_uw100_4008.

Updating the Firmware

NOTE:
Screen images from the Windows® 7 operating system are used in this document as an example.
Images used in this page may differ from the actual screen.
For details on Windows® and computer operations, refer to the instruction manual of your computer.

How to Update

  1. Insert the Easy Wireless Stick for which you want to update the firmware into the computer's USB port.

    NOTE:
    If the [AutoPlay] screen appears, close it. If the software starts automatically, exit it.

  1. Run the "FirmUpdateTool_uw100_****.exe" (example: FirmUpdateTool_uw100_3000.exe) firmware update tool that was generated after downloading and uncompressing.

    NOTE:
    If the [User Account Control] dialog box (i.e., “Do you want to allow the following program
    from an unknown publisher to make change to this computer?” message) appears, select [Yes].

  1. Verify the version number displayed in the update confirmation screen, and click the [Update] button to start the firmware update.

NOTE:
• The overwrite process takes about 4 minutes.
• After overwrite starts, all buttons in the update tool screen are disabled.

Caution
Do not remove the Easy Wireless Stick from the USB port or attempt to remove the [EasyWS] CD drive while overwrite is in progress.

NOTE:
The Easy Wireless Stick will restart during the firmware overwrite process. Therefore, depending on your computer’s AutoPlay settings, the [AutoPlay] screen may appear, Explorer may open and the contents of the [EasyWS] folder may be displayed, or the PDF file in the [EasyWS] folder may open. In such cases, close the windows or files, and wait for update to complete.

  1. When overwrite is complete, the [OK] button is enabled.
    Click the [OK] button to exit the update tool.

  1. Check the firmware version of the Easy Wireless Stick and verify that update has been performed properly.
    (How to confirm the version)

NOTE:

If the firmware overwrite fails due to, for example, the Easy Wireless Stick being removed during the process, follow steps 1 to 3 in “How to Update” and try to update again.
(This only applies when updating from firmware Ver. 2.0.0.0 or later.)

For specific instructions, refer to the following manual.

Firmware Update Procedure

UW100_Firm-Update_win-EN.pdf (394 KB)

ET-UW100 Firmware Update Tool for Mac

You can update firmware by yourself without any special tool.

Applicable models

ET-UW100 (Easy Wireless Stick)

* Target firmware version: 2.0.0.0 or later

Caution
This Firmware Update Tool supports firmware version 2.0.0.0. or later.
Firmware update cannot be performed using the Mac update tool for firmware version 1.0.0.0. In such cases, use the Firmware Update Tool for WIndows.

Latest Version

Version 4.0.0.8
Click buttons below to check out version information.
For Mac

Update information (Version 4.0.0.8)
• Supports TH-80BF1/TH-65BF1/TH-50BF1
• Supports Mac OS X v10.9

Compatible Display Models TH-80BF1, TH-65BF1, TH-50BF1, TH-80LFB70, TH-65LFB70, TH-50LFB70, TH-65PB2, TH-50PB2, TH-103PB1, TH-85PB1, TH-65PF50, TH-60PF50, TH-50PF50, TH-42PF50

System Requirements

The computer must meet the following requirements in order to update the firmware.

OS Apple Mac OS X v10.6/v10.7/v10.8/v10.9
Interface USB 2.0
CPU At a minimum, the specifications must support operation of the above-described operating systems.
RAM At a minimum, the specifications must support operation of the above-described operating systems.

NOTE:

  • Operation via a USB hub is not guaranteed.
  • Operation is not guaranteed when used with system environments other than the above or on homemade computers.
  • Operation is not guaranteed for all computers that meet the above conditions.

Downloading the Software

Download

M_FirmUpdateTool_UW100_4008.dmg (3.35MB)

NOTE:
The file name of the update tool will vary depending on the product number and version of the target device.
Select the update tool that corresponds to your target device and the version you want to use.

How to Download

  1. Click the Download button above and the "Software Licensing Agreement" window will appear.
    Select [Agree] and the installer will begin to download automatically.
  2. Once the file has been downloaded, double click M_FirmUpdate_uw100_4008.dmg.
    FirmUpdateTool_uw100” will be mounted onto your desktop.

Updating the Firmware

NOTE:
Screen images from the Mac OS X v10.7 operating system are used in this document as an example.
Images used in this page may differ from the actual screen.
For details on Mac OS and computer operations, refer to the instruction manual of your computer.

How to Update

  1. Insert the Easy Wireless Stick for which you want to update the firmware into the computer’s USB port.
  1. Double-click the “FirmUpdateTool_uw100” that was generated after downloading.

  1. Verify the version number displayed in the update confirmation screen, and click the [Update] button to start the firmware update.

NOTE:
• The overwrite process takes about 4 minutes.
• After overwrite starts, all buttons in the update tool screen are disabled.

Caution
• Do not remove the Easy Wireless Stick from the USB port or attempt to remove the [EasyWS] CD drive while overwrite is in progress.

  1. When overwrite is complete, the [OK] button is enabled.
    Click the [OK] button to exit the update tool.

  1. Check the firmware version of the Easy Wireless Stick, and verify that update has been performed properly.
    (How to confirm the version)

NOTE:

• If the firmware overwrite fails due to, for example, the Easy Wireless Stick being removed during the process, follow steps 1 to 3 in “How to Update” and try to update again.

For specific instructions, refer to the following manual.

Firmware Update Procedure

UW100_Firm-Update_mac-EN.pdf (342 KB)