LCD Display LF50 Series

  • Advantages
  • Display Functions
  • Specifications
  • Optional Accessories

ECO Mode

Simply pressing the ECO button on the remote control switches the setting to lower power consumption.

CUSTOM: The menu of power consumption reduction is individually set.

ON: The following fixed values are set to the menu of power consumption reduction. Individual setting is not available.

•No Signal Power Off: Enable
•PC Power Management: On
•DVI-D Power Management: On
•Power Save: Sensor

Energy-Saving

• No Signal Power Off

Equipment power supply is turned OFF when there is no signal.
When this is set to "ENABLE", the power supply of the unit goes Off 10 minutes after the input signals stop.

• PC Power Management

When this function is set to ON, it operates under the following conditions to turn the power on or off automatically.
When no pictures are detected for 30 or so seconds during PC signal input:

• DVI-D Power Management

When this function is set to ON, it operates under the following conditions to turn the power on or off automatically.
When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:

• Power Save (Backlight Control)

A sensor detects the ambient lighting and automatically adjusts the backlight brightness to match the viewing environment.

Tamper-Resistant Settings

You can prevent operating errors in public places by making tamper-resistant settings in advance.


Maximum Volume Level : Sets the maximum sound volume.
Button Lock : Restricts the button operations for the display.
Remote User Level : Restricts the key operations for the remote control.

Screen Saver

The screen saver reduces the possibility of afterimages or image retention that can occur when displaying still images with constant, unchanging brightness for long periods of time. The Auto Power Off setting can also be set to automatically turn the power off when the screen saver operation ends.

Power-On Delay Function

For video walls and other multi-unit applications, this function automatically shifts the power-on time slightly for each display unit in the system, so there's less load on the power supply.

PJLink™*1 — Compatible Network Function for Remote Control

This network function lets you operate displays by remote control and monitor their status through a LAN connection. Since it supports the "PJLink™*1 Class 1" industry standard, existing infrastructure can be used for effective plasma display operation.
You can also control the display from a web browser, making it even easier to use.
The network function also uses the same protocol as Panasonic projectors, so other video devices can be combined to upgrade the system.

*1: Unified standards for a telecommunications protocol for operating and managing multiple projectors.
• When using the network function, be sure to set "Control I/F Select" in "Network Setup" to "LAN."

Multi-Screen System Dynamically Displays Images in Large Spaces

The Multi-Display function enlarges images up to five times their original size, both vertically and horizontally. It enlarges images by the same zoom ratio in both vertical and horizontal directions, such as 2x2, 3x3, 4x4 and 5x5, or by different ratios in order to effectively use vertically or horizontally elongated spaces. LCD display versatility can be further enhanced by freely selecting the zoom ratio to match the installation space.

* Some degradation occurs when images are enlarged.
* Provide an appropriate air-conditioned environment because the ambient temperature varies depending on the installation condition and location.

Images can be enlarged in 24 different ways.

Daisy-Chain Connection

Signals can be distributed to as many as 10 displays from a single DVI input. When ID numbers have been assigned to the displays in advance, any designated display can be operated by a single remote control.

Images are Distributed from a Single DVI Input

Up to 10 displays

* All of the displays can change at once with one input

Seam Hides Video Mode

When this mode is turned off, a full-screen image of the display panel, including edges (the entire width of the frame), is displayed. This is especially suitable for displaying text information, since no words are hidden by the frame.
The image areas that are hidden by borders can be adjusted in both vertical and horizontal directions.

Automatic Picture Positioning

Simply press the Auto Setup key on the remote control to position the picture. This function automatically corrects the horizontal and vertical picture positions, the Clock Phase, and the Dot Clock when an RGB signal is input. The adjustment results in optimal standard values for horizontal and vertical picture sizes.

* When digital RGB signal input, Dot Clock and Clock Phase cannot be made.

1:1 Pixel Mode

The 1:1 Pixel mode maps the 1920 × 1080 video content to full-HD panel pixels to display 100% of the original content. By skipping the scaling process, this mode is able to produce high-definition images in their original, 1:1 pixel form.

* Compatible signal format: 1,125/50i, 60i, 24sF, 24p, 25p, 30p, 50p, 60p, 1,250/50i

4x Digital Zoom

This function lets you enlarge a portion of an image up to four times its normal size and display it on the full screen. This function can help give presentations greater impact.

• Digital Zoom does not work in Multi Display or Dual Picture mode.
• Some degradation occurs when images are enlarged.