LCD Display LF80 Series

Why Choose a Panasonic Display for Digital Signage?

What's DIGITAL LINK?

  • Advantages
  • Display Functions
  • Specifications
  • Optional Accessories

DIGITAL LINK

DIGITAL LINK Function Enables Simple Installation and Low System Costs

Using DIGITAL LINK makes it possible to transmit video, audio and control signals over a long distance (up to 150 m (492 ft) with a single LAN cable.*1 Easy cabling also reduces labor during setup. This provides transmission of high-quality images and sounds, as well as remote control.

*1 When connected with the [Long reach] mode, the maximum transmission distance is 150 m (492 ft). In this case, the unit can receive the signals of up to 1080/60p. A CAT5e (STP) cable or higher is required.

For more information:
What's DIGITAL LINK?

Failover and Failback

Failover and Failback Safeguards for Mission Critical Situations

The LF80 Series is equipped with a variety of signal input terminals : two HDMI, DVI-D, DIGITAL LINK, and USB. If the main video and audio signals are interrupted, the system immediately switches to alternative signals. This makes it ideal for mission critical control rooms and surveillance centers. If the main signals are restored, the original image is displayed.

Backup Input (Quick) Setting Conditions

  Main
HDMI 1
HDMI 2
DIGITAL LINK
DVI-D
PC
COMPONENT*
VIDEO
USB
Backup HDMI 1
HDMI 2
DIGITAL LINK
DVI-D
PC
COMPONENT*
VIDEO
USB

Backup Input (Normal) Setting Conditions

  Main
HDMI 1
HDMI 2
DIGITAL LINK
DVI-D
PC
COMPONENT*
VIDEO
USB
Backup HDMI 1
HDMI 2
DIGITAL LINK
DVI-D
PC
COMPONENT*
VIDEO
USB

:Selectable for both Primary and Secondary. : Selectable for either Primary of Secondary. : Not selectable for neither Primary nor Secondary.

* [COMPONENT] may be displayed as [RGB] depending on the settings of [Component/RGB-in select]. For more information, see the operating instructions.

Multi Monitoring & Control Software

Multi Monitoring & Control Software (Free) Lets You Control Devices in Groups

This free Panasonic software enables you to monitor and control up to 2048 devices over a LAN network from a single PC. As a monitoring function, the status of multiple devices can be listed in groups, and then detailed information on each device can be separately displayed. As a control function, control commands such as power ON/OFF, input switching and command inputs can be executed, and a schedule function can be used.

Download Software from Global Website

Cloning Function

Cloning Function Saves Labor When Setting Up Multiple Devices

You can easily copy the setting data of a master display to other displays using USB memory. This saves labor when making screen settings during the installation of multiple devices.

* If the inch sizes/series for the displays differ, the cloning function does not operate. Use common inch sizes/series.

Early Warning Software

Compatible with "Early Warning Software" for Sensing Display Problems in Advance

The LF80 Series support Early Warning Software (optional: ET-SWA100), which monitors the status of devices (projectors or flat-panel displays) connected to an intranet, reports device failures, and gives advance warnings by detecting predicted abnormalities, after installation to the PC has been completed. The status of displays in an intranet is observed, and problems are forecast, the occurrence of other problems is sensed, and notification is sent to the user.

* The use of this software will not detect malfunctions in all devices and equipment in advance.

Early Warning Software:
https://panasonic.net/cns/prodisplays/products/et-swa100/