Glossary

1:1 Pixel mode

A 1980 x 1080 video input signal is displayed as is onto the panel. The function provides a one-to-one correspondence between the video signal pixel and the display pixel. For 1125i and 1125p, the screen size is adjusted. This achieves a highly fresh and high-quality picture display.

Category: Pcture quality, Video display

12-Segment Color Management

Adjusts the color strength and brightness covering not only the three primary colors (RGB) but also complementary colors (CMY) and their intermediate colors. This allows you to adjust the content colors more easily and correctly.

SQ1 Series

Category: Pcture quality, Video display

3D-LUT Color Reproduction

To achieve constant color reproduction by keeping the balance with six coordinate axes of the three primary colors (RGB) and their complementary colors (CMY).

LQ70/LQ70L Series

Category: Pcture quality, Video display

4-Input Multi Display (up to FHD)

To display pictures input from different devices onto a single display as four divided pictures. (Maximum resolution: 1920 x 1080)

SQ1 Series LQ70/LQ70L Series

Category: Function, Video display

4K

A generic name for liquid crystallinity of approx. 4000 (W) x 2000 (H) pixels. The actual resolution of Panasonic 4K displays is 3840 x 2160 pixels. Describes a clear image of even a single hair and a real, fresh water drop splash with pixel density four times higher than that of the Full-HD images.

Category: Pcture quality, Video display

4K Daisy Chain

A connection method to link multiple displays in a row. This method covers outputs of 4K pictures (3840 x 2160) in the 4-multiscreen mode by daisy-chain-connection using DisplayPort.

SQ1 Series LFV8 Series

Category: Connection, Video display

4K Multi Screen

To output 4K videos (3840 x 2160, 30p) when a multi-screen (Video Wall) is installed by daisy-chain-connecting.

LFV8 Series

Category: Video display, Installation

6-Segment Color Management

To adjust the parameters of color tone, color strength and brightness individually based on the three primary colors (RGB) and their complementary colors (CMY).

Category: Pcture quality, Video display

Aluminum Cabinet

An aluminum cabinet strongly resistant to corrosion and rust. It is used for outdoor models.

Category: Panel & chassis

Anti Glare Surface Treatment

A type of surface treatment for LC panels, by performing chemical treatment on the glass surface to form a fine unevenness that will suppress the reflection of light from outside.

Category: Panel & chassis

Anti Reflection

A type of surface treatment for LC panels, by coating a thin film over a transparent plate such as a glass or acrylic panel that will reduce the reflection of light from outside.

Category: Panel & chassis

Anti-Glare Low Reflection

A type of surface treatment for LC panels, by coating a thin film over the anti-glare surface that will suppress the reflection of light from outside and improve the visualization of images.

Category: Panel & chassis

Automatic Picture Position

To automatically correct the "Horizontal/Vertical Position," "Horizontal/Vertical Size," "Dot Clock" and "Clock Phase" by pressing the AUTO SETUP button on the remote controller at the input of RGB signals. By setting the AUTO mode, this function automatically activates when the input signal is switched.

Category: Function, Video display

Backlight Optimization

A function to detect the ambient brightness using sensors and control the display brightness to the optimum level. By suppressing the display panel brightness, power saving is achieved.

Category: Panel & chassis

Backlight Area Control

To reproduce the real brightness difference in the image by precisely adjusting the LED backlight brightness for each area. The depth of details can be precisely displayed.

Category: Panel & chassis

Bezel

A "frame" of the display main unit. Since the bezel itself corresponds to a "skeleton" having no electrical role, the use of a thinner and finer bezel helps miniaturization and weight reduction in the housing.

Category: Panel & chassis

Blackout

To turn off the picture where the temperature becomes high when the LC display is exposed to sunlight and the internal temperature rises.

Category: Installation, Software, others

Block Noise

A phenomenon in which a part of the picture area resembles a mosaic when the picture is digitally compressed.

Category: Video display

Brightness

Brightness presents the luminous intensity of the display in units of cd/m², based on the light quantity irradiated onto one square meter. As the numeric value increases, the display is easier to see even in a bright environment.

Category: Video display

Built-in Speaker

A speaker built into the main unit, which reproduces the voice content and materials with high sound quality. Without an external speaker, the installation space can be effectively used.

Category: Function

Built-in Whiteboard

A white board that can be used simply by powering ON without connecting to a PC. It covers multi-touch at a maximum of 4 points.

BF1 Series

Category: Function

Button/Input Lock

To limit the button operation on the main unit and the remote controller to prevent misconduct when the display is installed in a public space. This helps reduce errors during operation.

Category: Function

Calibration

To adjust the difference in individual displays and dispersion of color and brightness as time elapses.

Category: Function

CAT5e

A twisted pair cable standard for high-speed signal transfer. The transfer speed varies depending on the category. CAT5e is a high-ranking standard in Category 5, covering communication speed as fast as 1Gbps and a transmission zone as high as 100MHz. This standard is also called "Gigabit".

Category: Connection, Communication

Cloning Function

To copy the setting information of the mother display to other displays. When multiple displays are installed, this function reduces the setting time of each display. (The settable information varies depending on the display model.)

Category: Function

Color Enhancement

To adjust the color according to the picture characteristics and present pictures with good liveliness and coloration.

Category: Video display

Color Matching

To correct color unevenness between displays by the three primary colors (red, green and blue) and their complementary colors (cyan, magenta and yellow) individually on a Multi Screen.

Category: Function, Video display

Content Management Software

PC software that creates still pictures and moving pictures in the display. Created play lists and schedule settings can be delivered to the displays via a USB memory or LAN. (For Windows version only. Free of charge.)

Content Management Software

Category: Software, others

Continuous Operation

To display a picture for a long time without powering OFF the display. Panasonic displays for business use are models that ensure stable operation for 24 continuous hours. They are suitable for signage in public places such as airports and stations because of the ability to display vivid pictures for a long time.

Category: Function

CUD (Color Universal Design)

A design that adopts a color scheme capable of communicating information correctly to as many people as possible, regardless of individual differences caused by eye diseases and gene characterization. This is named by the Color Universal Design Organization (CUDO). CUD covers printing matter, equipment, public properties, web sites, stationery, teaching materials and cooking apparatuses. It is verified based on the following three viewpoints:
1: Is the color arrangement easily identified by many people?
2: Is the design worked out without depending on the color only?
3: Is it possible to communicate using the color name (for example, specify the color name)?
CUD is also called barrier-free coloration.

Category: Function, Video display

Daisy Chain

A wiring method that links multiple devices in a row. The number of connectable units may be limited depending on the cable, signal and operating device.

Category: Function, Installation

DIGITAL LINK

DIGITAL LINK is a connection system based on the HDBaseT™ standard. It enables HDMI signals, 4K non-compressed videos (4.2.0), Full-HD images, voice signals and control signals to be transmitted long-distance using a single LAN cable. This makes it possible to introduce a simple, high-quality digital transmission system easily at low cost.

DIGITAL LINK

Category: Function, Connection

Digital Zoom

To enlarge and display the selected screen area at a magnification rate of 4 at the maximum. The partial close-up function available as required will be useful as an effective visual expression in presentations, lectures and events.

Category: Function, Video display

Direct LED

To install an LED light source on the entire back side of the LC panel. This function precisely controls the LED light, which enables high contrast.

Category: Panel & chassis

DisplayPort

DisplayPort is a video output interface standard designed for display devices such as LCDs. It has been formulated by VESA, a standardization organization.

Video cable type

VESA

Category: Connection

Dual Picture Mode

A function to display two different video sources simultaneously. Picture-in-Picture displays a sub-screen. Picture-by-Picture displays two screens side by side. (Displayable screens vary depending on the model.)

Category: Function, Video display

DVI

DVI (Digital Visual Interface) is a video output interface standard designed to make full use of the picture quality of digital display devices such as LCDs and projectors. Two types of connection, single link and dual link, are available. It was formulated by DDWG (Digital Display Working Group). The first standard was announced in 1999.

Video cable type

Category: Connection

Early Warning Software

Early warning (failure sign monitoring) monitors the display condition on an intranet, predicts errors and notifies the user. It detects the sign of problems and notifies the user about it. (Software for a fee)

Early Warning Software

Category: Software, others

ECO mode

Various settings to reduce power consumption. The setting varies depending on the model, for example, adjusting the backlight brightness and turning OFF the power supply at the time of no-signal.

Category: Function

Edge LED

A method to arrange the LEDs side by side at either edge of the LC panel and spread the light all over using a plate panel called a light-guiding panel.

Category: Panel & chassis

Eyebolt

A bolt used to hang the main unit when installing or moving it. This is used for temporary hanging or moving.

Category: Panel & chassis, Installation

Failover & Failback

A function to immediately switch to the backup signal during digital input (DVI-D, HDMI, digital link) even if the main video/voice signals are interrupted. This is suitable for monitoring rooms that need to avoid interruptions in the picture display and for digital signage. Once the main signal is restored, the function automatically switches to the original signal.

Category: Function, Video display

Fanless

A display without a cooling fan, which eliminates dust accumulation in the display interior to suppress problems. The excellent quietness thanks to the no-fan design is suitable for installation in classrooms and conference rooms.

Category: Function, Panel & chassis

Forced Air-Cooling System

A system to bring air into the display's main unit and create an air flow between the front glass and the LC panel. This suppresses increases in internal temperature and dew generation when the display is installed outdoors.

Category: Function, Panel & chassis

Frame Control

To adjust the picture display timing to show a moving picture more naturally when expanding the picture on a multi-screen.

Category: Function, Video display

Frame Creation

A function to display fast moving scenes more clearly by automatically correcting the frame rate and removing picture disturbances to create a smooth picture.

Category: Function, Video display

Function Board

A board that adds functions and terminals according to the display application. It is also called a function board. (Separately sold)

Category: Connection

G to G

Gray to Gray means the intermediate gradation response speed, that is, the time required to change from a certain intermediate gradation to any other one. As the response speed becomes faster, the device tends to manage fast moving pictures better.

Category: Function, Video display

Gradation

A gradation of strongness of color and brightness. This is one of the elements to determine the display picture quality and is used as a unit of color/brightness expressive power. As the gradation level increases, changes of color and brightness can be presented with smooth gradation, close to natural rendering.

Category: Video display

Gradation Smoother

To extract and eliminate the noise components from the video input signals to display noise-free pictures.

Category: Function, Video display

Haze

A ratio of diffused light to full transmitted light. The more this value increases, the more the reflected glare of fluorescent light or its equivalent decreases.

Category: Video display

HDCP

HDCP (High-bandwidth Digital Content Protection) is a technology developed by Intel in the U.S. This is a type of copy guard that protects digital content copyrights. By encrypting video signals between the PC or AV device and the display, output images are protected from illegal copying. It is adopted by DVI and HDMI.

Category: Communication, Connection

HDMI

HDMI is an abbreviation of High-Definition Multimedia Interface. This is a standard of the communication interface that transmits video and voice via digital signals. Even a single HDMI cable is fully capable of transmitting video and voice.

Video cable type

Category: Connection

HDMI-CEC

CEC (Consumer Electronics Control) is a link function to mutually operate televisions and recorders by transmitting and receiving control signals in-between. By connecting a device covering HDMI-CEC to a display using an HDMI cable, the basic operations of the connected devices become possible. This function is also available with an installation where the Set Top Box is hidden.

Category: Function, Connection

ID Remote Control

A function to set an individual ID to each display in order to prevent misoperation of the remote controller when multiple displays are linked in a row. By specifying the display ID when operating the remote controller, secure operation is achieved.

Category: Function

IK Code

IK code presents the degree of protection against physical impacts. This is a grade of protection against external impacts to the electronic device housing in accordance with CE EN50102 (in June 1995). The more the numeric value following IK increases, the more the device becomes resistant to strong impacts (up to IK10).

Degrees of protection against external mechanical impacts

IK00 Not protected
IK01 0.14J
IK02 0.20J
IK03 0.35J
IK04 0.50J
IK05 0.70J: Equivalent to impact of 0.25 kg mass dropped from 280 mm abovee impadte surface.
IK06 1.00J: Equivalent to impact of 0.25 kg mass dropped from 400 mm above impacted surface.
IK07 2.00J: Equivalent to impact of 0.5 kg mass dropped from 400 mm above impacted surface.
IK08 5.00J: Equivalent to impact of 1.7 kg mass dropped from 300 mm above impacted surface.
IK09 10.00J: Equivalent to impact of 5 kg mass dropped from 200 mm above impacted surface.
IK10 20.00J: Equivalent to impact of 5 kg mass dropped from 400 mm above impacted surface.

Energy unit: Joule

Application of the IK code as specified on the International Electrotechnical Commission (IEC) Technical Report - Edition 1.0 2011-04.

Category: Panel & chassis, Installation

Image Settings

To display an image when the display starts up and when no signal is received. The image data is stored in the main unit via a USB memory. A company logo and brand image can be set. (The resolution is 1920 x 1080 pixels or 3840 x 2160 pixels. The image format and installation method vary depending on the model.)

Category: Function, Video display

Input Lock

To limit the operation of the main unit and the remote controller. This is a measure to prevent malfunctions caused by misconduct when the display is installed at a place in public view.

Category: Function

Input Search

To automatically switch the input and display the backup video in cases where the video signal is stopped due to a problem. This helps to avoid a situation where no video is displayed during signage operation.

Category: Function

Intel® SDM

Intel® SDM (Smart Display Module) is a universal standard for slots that support 4K signals. Selection of the interface board enables the addition of various functions.

Category: Function

IP (Ingress Protection) Rating

Standardization of device protection concerning dust proofing and waterproofing. IEC (InterNational Electrotechnical Commission), IEC144, IEC529 and DIN40 050 classify the dust proofing and waterproofing by grade for device protection structures and regulate the test methods. The IP identification based on these standards is used globally in the form of IPxx (xx stands for a numeric value). The first symbol presents protection against the human body and solid foreign matter and the second symbol presents protection against water infiltration.

First Digit : Solids
The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects.

Level Object size protectet against Effective against
IP0x Not protected No protection against contact and ingress of objects
IP1x >50 mm Any large surface of the body, such as the back of the hand, but no protection against deliberate contact with a body part.
IP2x >12.5 mm Fingers or similar objects.
IP3x >2.5 mm Tools, thick wires, etc.
IP4x >1 mm Most wires, screws, etc.
IP5x Dust Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact.
IP6x Dust Tight No ingress of dust; complete protection against contact.

Secnd Digit: Liquids
Protection of the equipment inside the enclosure against harmful ingress of water.

Level Object size protectet against Effective against
IPx0 Not protected
IPx1 Dipping water Dripping water (vertically falling drops) shall have no harmfull effect.
IPx2 Dipping water when tilted up to 15° Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position.
IPx3 Spraying water Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.
IPx4 Spashing water Water splashing against the enclosure from any direction shall have no harmful effect.
IPx5 Water jets Water projected by a nozzle (6.3mm) against enclosure from any direction shall have no harmful effects.
IPx6 Powerful water jets Water projected in powerful jets (12.5mm nozzle) against the enclosure from any direction shall have no harmful effects.
IPx7 Immersion up to 1 m Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion).
IPx8 Immersion beyond 1 m The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.

* Explanation of the letters IP is given in IEC 60529 (Ed. 2.1), clause 4.1

Category: Panel & chassis, Installation

IPS

IPS (In Plane Switching) is an LCD drive method. Since the IPS method does not generate a vertical inclination of liquid crystal molecules, it features a lesser change of brightness and color when viewed askew.

Category: Panel & chassis

IR Terminal connection

IR is an abbreviation of Infrared. The display is remote-controlled using IR signals. By connecting displays using a 3.5mm miniature plug, multiple displays can be operated with a single remote controller.

Category: Function

LAN Control

A function to enable simultaneous control and batch management for devices via a network connected with LAN. This is also available with LAN control of AMX and Crestron Connected™.

Category: Function, Connection

Local Dimming

A function to divide the whole screen into several segments and adjust the backlight brightness according to the brightness of the picture to be displayed on each segment. This greatly increases the contrast ratio in different areas on the same screen.

Category: Function, Video display

Long Reach Mode

A DIGITAL LINK connection mode, which enables signal transmission (1080/60p) using a single LAN cable at a distance as long as 150 meters (normally 100 meters). The models that support the long reach mode are limited.

Category: Function, Connection

Maximum VOL function

To set the sound volume below the preset level. One of the misconduct prevention functions.

Category: Function

Monitor Out

To use a VGA cable for the display monitor OUT terminal, to connect a second display and projector and display the same screen (for 1080/60p signal only).

Category: Function, Video display

Mosquito Noise

A disturbance (noise) in the digitally compressed picture (especially, JPEG still pictures and MPEG moving pictures) occurring in its outline or areas having drastic color change. This name comes from the picture's resemblance to being enveloped by a swarm of mosquitos.

Category: Video display

Mpeg Noise Reduction

A function to reduce block noise and mosquito noise specific to digital video signals. This helps faithfully reproduce the beauty originally possessed by the image.

Category: Function, Video display

Multi Monitoring & Control Software

Software that can monitor and control up to 2,048 units from a single PC via LAN. This enables you to display detailed information on each connected device, execute control input such as power ON/OFF and commands, and use the scheduling function. (Free software)

Multi Monitoring & Control Software

Category: Software, others

Multi Screen

To connect and use multiple displays for the purpose of expanding the display area. It is also called a Video Wall.

Category: Function

Multi Touch

To make it possible for multiple users to operate the screen by touching it simultaneously. The number of simultaneous touches permitted varies depending on the model.

BF1 Series BQE1/BFE1 Series

Category: Function

Multi-live Mode

A function to display simultaneously from 4 or 16 devices using a split screen. A single PC can simultaneously transmit signals to 8 display or projector units at the maximum.

Category: Function

Narrow Bezel

A design that suppresses hidden picture areas. This makes the display boundary unnoticeable and enables a natural and dynamic picture displayed on a large screen.

Category: Panel & chassis

No Activity Power Off

To automatically power OFF if there is no input synchronizing signal for approximately 10 minutes. This suppresses power consumption.

Category: Function

OpenPort PLATFORM®

An original Panasonic infrastructure based on the Android™ OS, which provides the stable application of highly reliable signage authenticated by Google.

AF1 Series

Category: Function

Outdoor Mode

To adjust the internal temperature so that the temperature will not decrease excessively to prevent dew condensation and keep the operability when using an outdoor display in a low-temperature environment.

Category: Function, Installation

PASS (Panasonic Professional Display and Projector Technical Support Website)

PASS (Panasonic Professional Display and Projector Technical Support Website) is a general support site that provides various services to those who use or are considering the purchase of a Panasonic display projector for business purposes.

PASS

Category: Software, others

Picture-by-Picture

A type of two-picture display. Two pictures with the same size are displayed side by side. This function is also called "Side by Side".

Category: Video display

Picture-in-Picture

To display a sub-screen in the main screen to show the different image source content. It is also called a child screen.

Category: Video display

PJ Link™

A unified standard to operate and manage projectors and displays regardless of the manufacturer. It was formulated by JBMIA (Japan Business Machine and Information System Industries Association) in 2005.

Category: Function, Communication

Playlist

A list where still picture/moving picture content reproduction procedures and reproduction time are set.

Category: Function

Power Management

A function to suppress power consumption. It automatically powers OFF the device when an image (video signal) is not detected for a certain period of time. Then, once a video signal is detected, the device is powered ON.

Category: Function

Power save

A function to promote power saving. Power consumption is reduced through adjustment of the backlight brightness.

Category: Function

Power-on Screen Delay

To delay the timing to power ON each display and disperse the power load when multiple displays are installed and simultaneously powered ON.

Category: Function

Pre Calibration

To complete the adjustment when shipping from the factory so as to eliminate the dispersion in color temperature and brightness caused by individual display difference when building a Video Wall.

Category: Function

Protective Glass

Glass that covers the LCD. This helps the installation of the display in busy places and facilitates maintenance.

Category: Panel & chassis

QR Code

A matrix type two-dimensional code developed by the Development Division, Denso (renamed Denso Wave Incorporated at present). You can access desired sites by reading the code with a smartphone or a cellular phone and can you code a coupon or a mail address. By adding the code to the signage contents, it is possible to increase the information to be provided.

Category: Function

Refine Enhancer

To correct an unclear picture outline generated by resizing and improve the resolution.

Category: Function, Video display

Remote Control User Level

To limit the remote controller button operation. There are several levels provided: OFF to level 1 to 3, covering operation free from limitation to nullification of all the button operations.

Category: Function

Reverse Scan

A function to invert the picture scanning direction and display a moving picture more naturally in the enlarged display mode.

Category: Function, Video display

Screensaver

To reduce afterimages and seizures that occur when the same still picture continues to appear in the display for a long time. This function also enables the display to automatically power OFF after the screen saver operation is terminated.

Category: Function

SDI

SDI (Serial Digital Interface) is an interface standard to be used mainly for video equipment for business use. Non-compressed digital video signals and digital voice signals can be transmitted using a single coaxial cable.

Category: Connection

Seam Hides Video Off Mode

To adjust the picture area hidden in the joints in the vertical and horizontal directions when installing the multi-screen (Video Wall). By switching to this mode when displaying character information or displaying motion pictures, the picture becomes easier to see.

Category: Function

Secondary Display

To use a VGA cable on the display monitor OUT terminal, connect a second display and projector and display the same screen (for 1080/60p signal only).

BF1 Series

Category: Function

SLOT 2.0

A standard of the function slot of the display main unit. By mounting the terminal board separately sold, customization will be possible according to the application. (The models with slots are limited.)

BF1 Series

Category: Connection

SLOT NX

A 4K interface standard. By mounting the 3G-SDI terminal board separately sold, the SDI connection will be possible. This is suitable for broadcasting and rental applications and long-distance connections. SLOT NX is not compatible with SLOT 2.0.

LQ70/LQ70L Series

Category: Connection

Smooth Switching Presenters

To switch the signal to be displayed automatically when the input signal whose picture is currently displayed is stopped or an input signal different from the one whose picture is currently displayed comes in. The combination of terminals to be switched varies depending on the model.

Category: Function, Video display

SNMP

SNMP (Simple Network Management Protocol) is used to monitor and control the communication devices connected to the TCP/IP network, such as routers, switches and servers, via the network. The supported functions vary depending on the version. SNMP version 3 is used in sites requiring severe security such as courthouses and financing service sites.

EQ1 Series

Category: Function

STB (Set Top Box)

A Set Top Box is a device that is connected to a display to receive a variety of services, and add functions.

Category: Installation, Software, others

Tilting Installation

A method for installing the display at a certain angle using a wall hook and ceiling hanger. This allows the display angle to be adjusted to improve visibility when installing the display at a high or low place. The tilting angle and destination vary depending on model.

Category: Installation

Touch Panel

A display capable of entering figures and characters and button operation using a finger and a touch pen. This is suitable for applications at schools, conference rooms and floor guides.

BF1 Series BQE1/BFE1 Series

Category: Function, Panel & chassis

USB Media Player

A function to reproduce content simply by inserting a USB memory, easily implementing digital signage without using a PC or Set Top Box.

Category: Function, Connection

USB Memory Network Setting

To automatically perform settings for simultaneous reproduction between displays and troublesome networks with external control by saving the LAN setting file in the USB memory and inserting the memory into the display. It is also possible to automatically set IP addresses with serial numbers.

Category: Function, Connection

USB Memory Viewer

To display digital content such as moving pictures and still pictures saved in the USB memory simply by inserting the memory into the display. It is not necessary to connect a PC.

Category: Function, Video display

VA panel

VA (Vertical Alignment) is an LC panel drive method. Because of its high contrast ratio, the VA method seems to make the picture stronger by emphasizing black compared to the IPS method as long as it is viewed from the front.

Category: Panel & chassis

VESA Compliant

The VESA standard (VESA mount/FDMI/Flat Display Mounting Interface) stipulates the positions and size of metal fittings and screw holes since the display back is to be fixed to the wall or an arm stand. VESA (Video Electronics Standards Association), an organization in the industry, stipulated the standard in 1997.

VESA

Category: Installation

Video Wall

To connect multiple displays and use them for the purpose of expanding the display area. It is also called a multi-screen. The number of settable units as a group varies depending on the model.

Category: Function, Installation, Video display

Video Wall Manager

A function to adjust the color tone using the color sensor and remove uneven color tones from the displayed picture when installing multiple displays on the wall. This enables you to adjust the color on the PC in the same manner on the remote controller to manage the adjustment data. (Free software)

Category: Software, others

WEB Browser Control

A function to control the display main unit and set network and password using a WEB browser.

Category: Function

Weekly Command Timer

To set the program (time, command) by the day of the week and perform timer control. For example, it is possible to change the content and time zone to be broadcast between week days and the weekend.

Category: Function

Whiteboard Software

PC dedicated software. The display main unit functions as a white board, on which you can write with your fingers or in which an additional presentation tool or a PowerPoint file is incorporated to add comments (supporting Windows and Mac).

BF1 Series BQE1/BFE1 Series

Category: Software, others

Wide Viewing Angle

Normally, the more the viewing angle deviates from the front, the more the color, brightness and contrast of the LCD change. The wide viewing angle means that a normal viewing range is wide. Even when viewing the screen diagonally, the display has few changes. Installed at a busy place with passengers, such as a street, the display stands out to attract people (at an omnidirectional viewing angle of 178 degree at the maximum).

Category: Function

Wireless Connections

To transmit video and voice data in a Windows PC or Android device to the display in the wireless mode.

Category: Function

Close

Video cable type

Analog
  D-sub 15 pin Composite S-Video terminal Color difference between components BNC
Connector shape
Transmissible signal Video only Video only Video only Video only Video only
Managed resolution 2048 x 1536 at maximum 480i (720 x 480) 480i (720 x 480) 1080i (1920 x 1024), 720p (1280 x 720) 480i or 480p
Application General connector between the PC and the display in the analog manner Output luminance signal (Y) and color signal (C) simultaneously. Reduces noise because luminance signals and color signals are transmitted separately. Standard based on "Mutual Connection between HD Receiver and Peripherals" (JEIT CP-1213). It does not cover a video having a resolution of 480i. Mainly used as an analog video transmission cable for business use. This is separately used for an SDI signal and for a wireless antenna depending on the signal line thickness and resistance.
Digital Digital/Analog
  DVI
Single link
DVI
Dual link
DVI-I
Connector shape
Transmissible signal Video only Video only Video only
Managed resolution 1920 x 1200 at maximum 2560 x 1600 at maximum 2560 x 1600 at maximum
Application Connectors to connect the PC to an LCD digitally.
These models feature a higher picture quality than that of D-sub 15 pin because of direct digital transmission without conversion to analog when transmitting signals from the PC to a display.
Digital
  HDMI
DisplayPort SD-SDI HD-SDI
Connector shape
Transmissible signal Video, audio, control Video,audio, control Video, audio Video, audio
Managed resolution 4320p (8K) HDMI 2.1 7680×4320/60 Hz 480p 1080i
Transfer speed 1.2 GHz
48 Gbps/42.6 Gbps
32.4 Gbps
(8.1 Gbps×4 lanes)
270 Mbps or 360 Mbps 1.4835 Gbps or 1.485 Gbps
Application A connector to connect the PC to an LCD digitally
A next generation connector to connect the PC to an LCD digitally. DisplayPort features a more miniature size than DVI and higher speed than HDMI. Only a single cable enables transmission/reception of video, voice and control signals. Simply by linking multiple displays in a row using this connector, the multi-display environments can be achieved. SD-SDI has one channel for non-compressed HD digital images and 16 channels for PCM voice signals and transmits multiplex data such as time codes. It is standardized as SMPTE 292M in the U.S. HD-SDI has one channel for non-compressed digital images and 8 channels for PCM voice signals.