Specifications

PT-DZ21K2 Series

Large-Venue3-Chip DLP™ Projectors

PT-DZ21K2 SeriesPT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2

 
PT-DZ21K2

PT-DS20K2
Power supply 200–240 V AC, 50/60 Hz 200–240 V AC, 50/60 Hz
Power consumption 2,060 W (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal) 2,060 W (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal)
Refresh rate 120 Hz*2 120 Hz*2
DLP™ chip    
Panel size 24.4 mm (0.96˝) diagonal (16:10 aspect ratio) 24.1 mm (0.95˝) diagonal (4:3 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system DLP™ chip x 3, DLP™ projection system
Pixels 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels 1,470,000 (1400 x 1050) x 3, total of 4,410,000 pixels
Lens Optional powered zoom and fixed-focus lenses Optional powered zoom and fixed-focus lenses
Lamp    
Normal UHM lamp x 4 (432 W), replacement cycle of up to 3,000 hours*3 UHM lamp x 4 (432 W), replacement cycle of up to 3,000 hours*3
Portrait UHM lamp x 4 (432 W), replacement cycle of up to 1,000 hours UHM lamp x 4 (432 W), replacement cycle of up to 1,000 hours
Screen size (diagonal) 1.78–25.4 m (70–1,000˝), 3.05–15.24 m (120–600˝) with ET-D75LE90, 1.78–15.24 m (70–600˝) with ET-D75LE8, 16:10 aspect ratio 1.78–25.4 m (70–1,000˝), 3.05–15.24 m (120–600˝) with ET-D75LE90, 1.78–15.24 m (70–600˝) with ET-D75LE8, 4:3 aspect ratio
Brightness*4 20,000 lm (four-lamp) 20,000 lm (four-lamp)
Contrast*4 10,000:1 (Full On/Full Off, Dynamic Iris: 3) 10,000:1 (Full On/Full Off, Dynamic Iris: 3)
Resolution 1920 x 1200 pixels 1400 x 1050 pixels*5
Supported RGB signal XGA–WUXGA XGA–WUXGA
Supported video signal NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i
Optical axis shift*6
(from center of screen)
   
Vertical ±55 % (±44 % with the ET-D75LE6, +73 – +78 % with the ET-D75LE90) (powered) ±50 % (±40 % with the ET-D75LE6, +71 % with the ET-D75LE90) (powered)
Horizontal ±20 % (±15 % with the ET-D75LE6, ±6 % with the ET-D75LE90) (powered) ±30 % (±20 % with the ET-D75LE6) (powered)*7
Keystone correction range*8 Vertical: ±40 °, horizontal: ±15 ° Vertical: ±40 °, Horizontal: ±15 °
Keystone correction range with optional Upgrade Kit ET-UK20*8 Vertical: ±45 °, horizontal: ±40 °, Up to a total of ±55 °
during simultaneous horizontal and vertical correction.
Vertical: ±45 °, horizontal: ±40 °, Up to a total of ±55 °
during simultaneous horizontal and vertical correction.
Installation Ceiling/floor, front /rear, portrait*9 Ceiling/floor, front /rear, portrait*9
Cabinet materials Molded plastic Molded plastic
Dimensions (W x H x D) 620 x 255 x 730 mm (24 13/32˝ x 10 1/32˝ x 28 3/4˝) (optional lens, legs and lens cover not included) 620 x 255 x 730 mm (24 13/32˝ x 10 1/32˝ x 28 3/4˝) (optional lens, legs and lens cover not included)
Weight*10 Approx. 41.0 kg (90.4 lbs) (optional lens not included) Approx. 41.0 kg (90.4 lbs) (optional lens not included)
Operation noise*4 46 dB 46 dB
Operating environment Operating temperature: 0–45 °C (32–113 °F)*11, operating humidity: 10–80 % (no condensation) Operating temperature: 0–45 °C (32–113 °F)*11, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit) Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit)
     
Terminals PT-DZ21K2/
PT-DS20K2
 
PT-DW17K2

PT-DZ16K2
Power supply 200–240 V AC, 50/60 Hz 200–240 V AC, 50/60 Hz
Power consumption 2,060 W (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal) 2,060 W (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal)
Refresh rate 60 Hz*2 120 Hz*2
DLP™ chip    
Panel size 21.6 mm (0.85˝) diagonal (16:9 aspect ratio) 24.1 mm (0.95˝) diagonal (16:9 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system DLP™ chip x 3, DLP™ projection system
Pixels 1,049,088 (1366 x 768) x 3, total of 3,147,264 pixels 2,073,600 (1920 x 1080) x 3, total of 6,220,800 pixels
Lens Optional powered zoom and fixed-focus lenses Optional powered zoom and fixed-focus lenses
Lamp    
Normal UHM lamp x 4 (432 W), replacement cycle of up to 3,000 hours*3 UHM lamp x 4 (432 W), replacement cycle of up to 3,000 hours*3
Portrait UHM lamp x 4 (432 W), replacement cycle of up to 1,000 hours
Screen size (diagonal) 1.78–25.4 m (70–1,000˝), 3.05–15.24 m (120–600˝) with ET-D75LE90, 1.78–15.24 m (70–600˝) with ET-D75LE8, 16:9 aspect ratio 1.78–25.4 m (70–1,000˝), 3.05–15.24 m (120–600˝) with ET-D75LE90, 1.78–15.24 m (70–600˝) with ET-D75LE8, 16:9 aspect ratio
Brightness*4 17,000 lm (four-lamp) 16,000 lm (four-lamp)
Contrast*4 10,000:1 (Full On/Full Off, Dynamic Iris: 3) 10,000:1 (Full On/Full Off, Dynamic Iris: 3)
Resolution 1366 x 768 pixels*5 1920 x 1080 pixels*5
Supported RGB signal XGA–WUXGA XGA–WUXGA
Supported video signal NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i
Optical axis shift*6
(from center of screen)
   
Vertical ±70 % (±60 % with the ET-D75LE6, +78 – +96 % with the ET-D75LE90) (powered) ±60 % (±50 % with the ET-D75LE6, +75 – +88 % with the ET-D75LE90) (powered)
Horizontal ±30 % (±20 % with the ET-D75LE6, -13 – +27 % with the ET-D75LE90) (powered) ±20 % (±15 % with the ET-D75LE6, -12 – +14 % with the ET-D75LE90) (powered)
Keystone correction range*8 Vertical: ±40 °, horizontal: ±15° Vertical: ±40 °, Horizontal: ±15 °
Keystone correction range with optional Upgrade Kit ET-UK20*8
Installation Ceiling/floor, front /rear, portrait*9 Ceiling/floor, front /rear
Cabinet materials Molded plastic Molded plastic
Dimensions (W x H x D) 620 x 255 x 730 mm (24 13/32˝ x 10 1/32˝ x 28 3/4˝) (optional lens, legs and lens cover not included) 620 x 255 x 730 mm (24 13/32˝ x 10 1/32˝ x 28 3/4˝) (optional lens, legs and lens cover not included)
Weight*10 Approx. 41.0 kg (90.4 lbs) (optional lens not included) Approx. 41.0 kg (90.4 lbs) (optional lens not included)
Operation noise*4 46 dB 46 dB
Operating environment Operating temperature: 0–45 °C (32–113 °F)*11, operating humidity: 10–80 % (no condensation) Operating temperature: 0–45 °C (32–113 °F)*11, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software
     
Terminals PT-DW17K2/
PT-DZ16K2

*1 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal.

*2 Refresh rate varies depending on scanning frequency.

*3 This value (maximum, 50 % brightness) is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off more frequently, or if it is left on for longer intervals.

*4 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

*5 Input signals that exceed the native resolution will be converted to the native resolution.

*6 Optical axis shift function cannot be operated when used with the ET-D75LE50.

*7 Optical axis shift function cannot be operated when used with the ET-D75LE50/90.

*8 Range varies depending on mounted lens.

*9 Requires optional lamp units for portrait mode.

*10 Average value. May differ depending on the actual unit.

*11 When using the projector at high altitudes (between 1,400 m (4,593') and 2,700 m (8,858') above sea level), the operating environment temperature should be between 0°C (32 °F) and 40 °C (104 °F). If you use the smoke cut filter, the operating environment temperature should be between 0°C (32 °F) and 35 °C (95 °F). However, it cannot be used at high altitudes. If you use the Replacement lamp unit (for portrait mode), the operating environment temperature should be between 0°C (32 °F) and 40 °C (104 °F) when using it at elevations lower than 1,400 m (4,593') above sea level, and should be between 0°C (32 °F) and 35 °C (95 °F) when using it at high altitudes (between 1,400 m (4,593') and 2,700 m (8,858') above sea level). If you use the Replacement lamp unit (for portrait mode) together with the smoke cut filter, the operating environment temperature should be between 0°C (32 °F) and 30 °C (86 °F). (Portrait mode: only for the PT-DZ21K2/DS20K2/DW17K2)