PT-EZ770 Series

LCD Projectors PT-EZ770Z/ZL,PT-EW730Z/ZL,PT-EX800Z/ZL

“We need collaborative performance — it has to play nice with our system.” >> Seamless System Integration

Flexible Installation and System Integration

Equipped with a DIGITAL LINK terminal, the PT-EZ770 Series allows transmission of HDMI, uncompressed HD digital video, audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.

Optional ET-YFB100G Digital Interface Box for Easy Setup

By combining the optional ET-YFB100G Digital Interface Box, with its HDMI and other input terminals, uncompressed HD digital video, audio and control signals can be transmitted up to 100 m (328 feet) over a single CAT5e (STP) cable or higher. It allows projector connection with only one cable, making it ideal for ceiling-mounted and other permanent installations.
Also, because control signals can be simultaneously transmitted, the ET-YFB100G input signal can easily be switched with the wireless remote control that is included with the projector. The projector can be controlled by either serial or LAN communication.

DIGITAL LINK technology allows simple new 1 to 1 system.

Advantages:・A cost effective approach to cabling and layout・Digital transmission provides less signal degradation・Allows long distance transmission with a single cable
DIGITAL LINK
Digital Interface Box ET-YFB100G (Optional) Product Information

Also Supports Other Manufacturers’ Peripheral Equipment

DIGITAL LINK is an original function added to HDBaseT™ technology. Signals from the ET-YFB100G can also be relayed to a non-DIGITAL LINK-ready projector by using another manufacturer’s equipment based on the same technology.*

* Input selection and other ET-YFB100G operations can be performed only when connecting to a DIGITAL LINK compatible projector.
Note: HDBaseT™ is a trademark of the HDBaseT Alliance.

DIGITAL LINK technology allows easy integration into an existing control system.

Existing SystemDigital Interface Box ET-YFB100G (Optional) / DIGITAL LINK Compatible EquipmentConnecting to a DIGITAL LINK-ready Projector
Digital Interface Box ET-YFB100G (Optional) Product Information

The ET-YFB100G includes a scaling/resizing function, and can be operated by the projector's remote control.

Supporting the protocol of the industry's leading manufacturers, including Crestron, Extron, and AMX.

Tested Compatible Equipment
DIGITAL LINK Introduction

Flexible Installation

The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. It lets you easily make adjustments with the remote control. The unit can also be rotated 360 degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions.

NOTE: This illustration shows the lens shift of the PT-EZ770Z/EZ770ZL/EW730Z/EW730ZL.

A Wide Selection of Optional Lenses

Choose from a wide lineup of optional lenses for your system, including short-throw, long-throw zoom and fixed-
throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.

Models without lenses (PT-EZ770ZL/EW730ZL/EX800ZL) are also available.

Models with Standard Lens / Models without Lens*

* The specifications are the same as those of the PT-EZ770Z/EW730Z/EX800Z, respectively.

ET-ELW22 allows flexible installation in limited spaces

With Panasonic’s new ET-ELW22 short throw zoom lens, a projection distance from 1.71 to 2.13 meters (5.6 to 7.0 feet) is supported for a 100-inch wide screen.*
A short throw ratio adds flexibility for installation in narrow spaces.

* For the PT-EZ770. The PT-EW730 supports projection distance from 1.71 to 2.14 meters
(5.6 to 7.0 feet) for 100-inch wide screen (16:10 aspect ratio), and the PT-EX800 supports from
1.64 to 2.05 meters (5.4 to 6.7 feet) for a 100-inch screen (4:3 aspect ratio).

Featured image: ET-ELW22 attached to the PT-EZ770 series

NOTE: This illustration shows the projection distances of the PT-EZ770.

Easy Remote Monitoring and Control over a LAN

Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status.

In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.

The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.

Web Browser Control/Monitoring and E-mail Message Alert, PJLink™ Compatibility
Basic Concept of the Multi Projector Monitoring and Control Software

Crestron Connected™ and AMX Device Discovery

The LAN terminal allows a computer connected to the network to use Crestron Connected™ application software to manage and control system devices. Besides, the AMX Device Discovery technology is built in the PT-EZ770 Series.

Mechanical Lens Shutter

The mechanical lens shutter completely blocks annoying light leakage when the projector is on standby or temporarily not in use, such as during a meeting.

Corner Keystone Correction Enables Angled Projection

All you need to do is designate four points as the corners of the projected image, and this function easily carries out horizontal and vertical keystone correction.

Lens-Centered Design

A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.

Abundant Terminals, Including HDMI, DVI-D Input, and DisplayPort

Extensive interfaces include HDMI and DVI-D input terminals, DisplayPort, DIGITAL LINK and two sets of computer (RGB) input terminals.*
The serial terminal (RS-232C) has an Emulate function that lets you continue using existing control systems when replacing previous Panasonic models. It is also possible to output audio during Standby mode. This is convenient when connecting an external audio system through the projector.

* Supports YPBPR (YCBCR) signals.

Note: HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Built-in 10-W Speaker

The PT-EZ770 Series projectors feature a high-output 10-watt monaural speaker that produces a large sound volume without requiring external speakers.

Side-by-Side and P-in-P Function* for Effective Presentations and Lectures

Two different image sources can be simultaneously displayed onto a single screen. You can also switch to P-in-P (Picture-in-Picture) mode and display a sub-window onto the main screen. The sub-window can be positioned anywhere on the screen for more flexible and effective image presentations.

* This function is not effective for some source combinations.

Side-by-Side Mode / P-in-P Mode

Effective Theft Prevention with the Startup Logo

You can change the default Panasonic start up logo to any logo you want. A new logo can be easily uploaded by connecting a computer to the PT-EZ770 Series through the LAN or serial connection by using the Logo Transfer Software*. An abundance of other security measures are also included, such as a security bar, Key lock, and Security Password. This is very effective for preventing theft.

* Still images that can be uploaded are limited to 1024 x 768 pixel bitmap files. Also, the application will reduce the number of colors to 191.

Startup logo / Security bar

Other Features

• Presentation support/control tools such as Presentation Timer, Freeze Function, and Digital Zoom
• Projector identification system for remote control allocation of up to 64 projectors
• Direct Power Off right after use
• Built-in closed caption decoder (NTSC and 480i (YCBCR) only)