SOLID SHINE LCD Boosts Image Brightness While Reducing Your Workload, Delivering an Effortless Learning ExperienceSOLID SHINE LCD Boosts Image Brightness While Reducing Your Workload, Delivering an Effortless Learning Experience

Preliminary ProductLCD Projectors

PT-MZ16K SeriesPT-MZ16KL / PT-MZ13KL / PT-MZ10KL

As of September 2019

  PT-MZ16KL PT-MZ13KL PT-MZ10KL
Light Output 16,000 lm 13,000 lm 10,000 lm
Resolution WUXGA

Note: This series supports new lenses.
Please see here to check their launch dates.

Features

Pure Color, High Brightness, and Long-Life Operation

At up to 16,000 lm*1, color erupts in WUXGA. Radiant pictures are achieved with new 15.4 mm (1˝) LCD panels, Multi-Laser Drive Engine, 4K/60p signal input*2, and refined cooling system.

Unbeatable Reliability in the Real-World Conditions

To quickly fix problems while maintaining image display, the projectors feature Panasonic’s new Multi-Laser Drive Engine with failover circuity, a secondary backup signal input, and Information Monitor to show error information.

Compact, Flexible, and Ready for a Stress-free Install

Easy-to-handle compact body weighs under 22.3 kg*3 (49.2 lbs.), runs at just 32 dB*4, and suits seven optional zoom lenses for flexible installation. Setup is expedited with Geo Pro software*5.

*1 Brightness for PT-MZ16KL only. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*2 4K signal input is converted to the projector's resolution (1920 x 1200). Applicable terminals: DIGITAL LINK terminal/HDMI terminal.

*3 With standard ET-EMS600 lens included.

*4 Quiet Mode for PT-MZ16KL.

*5 For more information about activation of optional upgrade kits, please visit PASS for more information.

Specifications (Tentative)

  PT-MZ16KL PT-MZ13KL
Projector type LCD projectors
LCD panel  
Panel size 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Drive method Active matrix method
Pixels 2,304,000 (1920 x 1200) pixels x 3
Light source Laser diodes
Light output*1 16,000 lm 13,000 lm
Time until light output declines to 50 %*2 20,000 hours (NORMAL)/24,000 hours (ECO)
Resolution 1920 x 1200 pixels
Contrast ratio*1 3,000,000:1 (Full On/Full Off)
Screen size [diagonal] 1.78–25.4 m (70–1,000 in), 16:10 aspect ratio
Center-to-corner zone ratio*1 90 %
Lens Optional powered zoom lenses
Lens shift  
Vertical
(from center of screen)
±60 % with ET-EMS600 (powered)
Horizontal
(from center of screen)
±20 % with ET-EMS600 (powered)
Keystone correction range Vertical: ±40°, Horizontal: ±15°
Keystone correction range with optional ET-UK20 Upgrade Kit Vertical: ±40°, Horizontal: ±40°
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals  
SDI IN BNC x 1: 3G/HD/SD-SDI input
HDMI IN HDMI 19-pin x 1 (Compatible with HDCP, Deep Color, 4K/60p signal input)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
RGB IN D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP, Deep Color, 4K/60p signal input)
LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
USB USB Connector (Type A) x 1 (Output 5 V/2 A)
Power supply AC 100–240 V, 50/60 Hz
Power consumption Less than 1,050 W Less than 830 W
Cabinet materials Molded plastic
Filter Included (Estimated maintenance time: approx. 20,000 hours)
Operation noise*1 Less than 38 dB (NORMAL) / Less than 32 dB (Quiet) Less than 35 dB (NORMAL) / Less than 30 dB (Quiet)
Dimensions (W × H × D) 650 x 185*3 x 440 mm (25 19/32˝ x 7 9/32˝*3 x 17 5/16˝ ) (Without lens) (Not including protruding parts)
Weight*4 Less than 22.3 kg (49.2 lbs)
Operating environment Operating temperature: 0–45 °C (32–113 °F)*5; Operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
  PT-MZ10KL
Projector type LCD projectors
LCD panel  
Panel size 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Drive method Active matrix method
Pixels 2,304,000 (1920 x 1200) pixels x 3
Light source Laser diodes
Light output*1 10,000 lm
Time until light output declines to 50 %*2 20,000 hours (NORMAL)/24,000 hours (ECO)
Resolution 1920 x 1200 pixels
Contrast ratio*1 3,000,000:1 (Full On/Full Off)
Screen size (diagonal) 1.78–25.4 m (70–1,000 in), 16:10 aspect ratio
Center-to-corner zone ratio*1 90 %
Lens Optional powered zoom lenses
Lens shift  
Vertical
(from center of screen)
±60 % with ET-EMS600 (powered)
Horizontal
(from center of screen)
±20 % with ET-EMS600 (powered)
Keystone correction range Vertical: ±40°, Horizontal: ±15°
Keystone correction range with optional ET-UK20 Upgrade Kit Vertical: ±40°, Horizontal: ±40°
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals  
SDI IN BNC x 1: 3G/HD/SD-SDI input
HDMI IN HDMI 19-pin x 1 (Compatible with HDCP, Deep Color, 4K/60p signal input)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
RGB IN D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP, Deep Color, 4K/60p signal input)
LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
USB USB Connector (Type A) x 1 (Output 5 V/2 A)
Power supply AC 100–240 V, 50/60 Hz
Power consumption Less than 650 W
Cabinet materials Molded plastic
Filter Included (Estimated maintenance time: approx. 20,000 hours)
Operation noise*1 Less than 35 dB (NORMAL) / Less than 30 dB (Quiet)
Dimensions (W x H x D) 650 x 185*3 x 440 mm (25 19/32˝ x 7 9/32˝*3 x 17 5/16˝ ) (Without lens) (Not including protruding parts)
Weight*4 Less than 22.3 kg (49.2 lbs)
Operating environment Operating temperature: 0–45 °C (32–113 °F)*5; Operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [2], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.

*3 With legs at shortest position.

*4 Average value. May differ depending on the actual unit.

*5 Light output is limited at operating temperatures higher than 30 °C (86 °F), and projectors cannot be operated at altitudes higher than 2,700 m (8,858 ft) above sea level.

Accessories

Zoom lens
ET-EMW200 (0.480-0.550) (Available from April 2020)
ET-EMW300 (0.550-0.690) (Available from January 2020)
ET-EMW400 (0.690-0.950) (Available from November 2019)
ET-EMW500 (0.950-1.36) (Available from January 2020)
ET-EMS600 (1.35-2.10) (Available from November 2019)
ET-EMT700 (2.10-4.14) (Available from December 2019)
ET-EMT800 (4.14-7.40) (Available from January 2020)
Ceiling Mount Bracket
ET-PKD120H (for high ceilings) /
ET-PKD120S (for low ceilings) /
ET-PKD130H (with 6-axis adjustment mechanism)
Replacement Filter
ET-RMF100
Attachment for Ceiling Mount Bracket
ET-PKE301B
DIGITAL LINK Switcher
ET-YFB200G

Note: ET-YFB200G is not compatible with 4K signals.

Digital Interface Box
ET-YFB100G

Note: ET-YFB100G is not compatible with 4K signals.

Geometry Manager Pro Software Upgrade Kit
ET-UK20
Auto Screen Adjustment Upgrade Kit
ET-CUK10 / ET-CUK10P
Early Warning Software
ET-SWA100 Series*

Note: Part number suffix may differ depending on the license type.

* Multi Monitoring & Control Software Ver. 2.0 or later is required.
Please download from the following website:
https://panasonic.net/cns/projector/download/application/