InstallationLCD Projectors

PT-MZ880 SeriesPT-MZ880 / PT-MZ780 / PT-MZ680

 
PT-MZ880

PT-MZ780
Projector type LCD projectors
LCD panel  
Panel size 19.3 mm (0.76˝) diagonal (16:10 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Drive method Active matrix
Pixels 2,304,000 (1920 x 1200) pixels x 3
Light source Laser diodes
Light output*1*2 8,000 lm 7,000 lm
Time until light output declines to 50 %*3 20,000 hours (NORMAL/QUIET)/24,000 hours (ECO)
Resolution WUXGA (1920 x 1200 pixels)
Contrast ratio*1 3,000,000:1 (Full On/Full Off)
(When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1] or [2]. HDMI signal input)
Screen size (diagonal) 1.02–10.16 m (40–400 in), 1.52–10.16 m (60–400 in) with the ET-ELW22, 2.54–10.16 m (100–400 in) with the ET-ELU20, 16:10 aspect ratio
Center-to-corner zone ratio*1 85 %
Lens Powered zoom (throw ratio 1.61–2.76:1),
powered focus F = 1.7–2.3, f = 26.8–45.5 mm (for supplied lens; optional lenses also available)
Lens shift  
Vertical
(From the origin point of the lens mounter)
±67 % (powered) (for supplied lens; optional lenses also available*4)
Horizontal
(From the origin point of the lens mounter)
±35 % (powered) (for supplied lens; optional lenses also available*4)
Keystone correction range Vertical: ±25 °, Horizontal: ±30 ° (for supplied lens; optional lenses also available*4)
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals  
HDMI IN HDMI 19-pin x 3 (Compatible with HDCP 2.3, Deep Color, 4K/60p*5 signal input), CEC supported
COMPUTER IN D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
MONITOR OUT D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
SERIAL/MULTI SYNC IN D-sub 9-pin (female) x 1 for external control/link control (RS-232C compliant)
MULTI SYNC OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
AUDIO IN M3 stereo mini-jack x 1
AUDIO OUT M3 stereo mini-jack x 1
DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p*5*6 signal input)
LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
DC OUT USB Connector (Type A) x 1 (Output 5 V/2 A)
Power supply AC 100–240 V, 50/60 Hz
Power consumption*7  
Maximum power consumption 490 W (5.4–2.6 A) (510VA)
(Power consumption is 465 W at 200–240 V)
435 W (4.8–2.3 A) (460VA)
(Power consumption is 415 W at 200–240 V)
On-mode power consumption
(Light power)
[NORMAL]: 435 W (100–120 V), 415 W (200–240 V), [ECO]: 315 W (100–120 V), 300 W (200–240 V), [QUIET]: 310 W (100–120 V), 295 W (200–240 V) [NORMAL]: 395 W (100–120 V), 375 W (200–240 V), [ECO]: 285 W (100–120 V), 275 W (200–240 V), [QUIET]: 280 W (100–120 V), 270 W (200–240 V)
Cabinet materials Molded plastic
Filter Included (Estimated maintenance time: approx. 20,000 hours)
Operation noise*1 34 dB (NORMAL/ECO),
27 dB (QUIET)
32 dB (NORMAL/ECO),
26 dB (QUIET)
Dimensions (W x H x D) 561 x 190 x 437 mm (22 3/32˝ x 7 15/32˝ x 17 7/32˝)
(not including lens or protruding parts)
Weight*8 Approx. 18.6 kg (41.0 lbs) (with supplied lens)
Operating environment Operating temperature: 0–45 °C (32–113 °F)*9,
operating humidity: 20–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™, Geometry Manager Pro*10
 
PT-MZ680
Projector type LCD projectors
LCD panel  
Panel size 19.3 mm (0.76˝) diagonal (16:10 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Drive method Active matrix
Pixels 2,304,000 (1920 x 1200) pixels x 3
Light source Laser diodes
Light output*1*2 6,000 lm
Time until light output declines to 50 %*3 20,000 hours (NORMAL/QUIET)/24,000 hours (ECO)
Resolution WUXGA (1920 x 1200 pixels)
Contrast ratio*1 3,000,000:1 (Full On/Full Off)
(When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1] or [2]. HDMI signal input)
Screen size (diagonal) 1.02–10.16 m (40–400 in), 1.52–10.16 m (60–400 in) with the ET-ELW22, 2.54–10.16 m (100–400 in) with the ET-ELU20, 16:10 aspect ratio
Center-to-corner zone ratio*1 85 %
Lens Powered zoom (throw ratio 1.61–2.76:1),
powered focus F = 1.7–2.3, f = 26.8–45.5 mm (for supplied lens; optional lenses also available)
Lens shift  
Vertical
(From the origin point of the lens mounter)
±67 % (powered) (for supplied lens; optional lenses also available*4)
Horizontal
(From the origin point of the lens mounter)
±35 % (powered) (for supplied lens; optional lenses also available*4)
Keystone correction range Vertical: ±25 °, Horizontal: ±30 ° (for supplied lens; optional lenses also available*4)
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals  
HDMI IN HDMI 19-pin x 3 (Compatible with HDCP 2.3, Deep Color, 4K/60p*5 signal input), CEC supported
COMPUTER IN D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
MONITOR OUT D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
SERIAL/MULTI SYNC IN D-sub 9-pin (female) x 1 for external control/link control (RS-232C compliant)
MULTI SYNC OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
AUDIO IN M3 stereo mini-jack x 1
AUDIO OUT M3 stereo mini-jack x 1
DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p*5*6 signal input)
LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
DC OUT USB Connector (Type A) x 1 (Output 5 V/2 A)
Power supply AC 100–240 V, 50/60 Hz
Power consumption*7  
Maximum power consumption 360 W (4.2–2.0 A) (395VA)
(Power consumption is 345 W at 200–240 V)
On-mode power consumption
(Light power)
[NORMAL]: 330 W (100–120 V), 315 W (200–240 V), [ECO]: 240 W (100–120 V), 230 W (200–240 V), [QUIET]: 238 W (100–120 V), 228 W (200–240 V)
Cabinet materials Molded plastic
Filter Included (Estimated maintenance time: approx. 20,000 hours)
Operation noise*1 32 dB (NORMAL/ECO), 26 dB (QUIET)
Dimensions (W x H x D) 561 x 190 x 437 mm (22 3/32˝ x 7 15/32˝ x 17 7/32˝)
(not including lens or protruding parts)
Weight*8 Approx. 17.6 kg (38.8 lbs) (with supplied lens)
Operating environment Operating temperature: 0–45 °C (32–113 °F)*9,
operating humidity: 20–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™, Geometry Manager Pro*10

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.

*2 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL].

*3 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2]). Estimated time until light output declines to 50 % varies depending on environment.

*4 Lens-shift range and keystone correction range may vary depending on lens.

*5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection.

*6 YPBPR 4:2:0 format only for 4K/60p signals input via DIGITAL LINK.

*7 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).

*8 Average value. May differ depending on the actual unit.

*9 Note that the projector cannot be used at altitudes 2,700 m (8,858 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 700 m (2,297 ft) and ambient temperature is 38 °C (100 °F) or higher; when the projector is used at altitudes between 700 m (2,297 ft) and 1,400 m (4,593 ft) exclusive and ambient temperature is 36 °C (97 °F) or higher; when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,100 m (6,890 ft) exclusive and ambient temperature is 34 °C (93 °F) or higher; and when the projector is used at altitudes between 2,100 m (6,890 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 32 °C (90 °F) or higher.

*10 Some functions available in Geo Pro software are not supported by the PT-MZ880 Series.