Preliminary Product1-Chip DLP™ Projectors

PT-RDQ10 SeriesPT-RDQ10 / PT-RDQ90 / PT-RDQ80

1-Chip DLP™ 4K Projectors Create Captivating and Immersive Entertainment Experiences1-Chip DLP™ 4K Projectors Create Captivating and Immersive Entertainment Experiences

As of June 2021

  PT-RDQ10 PT-RDQ90 PT-RDQ80
Light Output 10,000 lm*1 9,000 lm*1 8,000 lm*1
Resolution 4K (3840 x 2160 pixels)*2
Aspect Ratio 16:9

Features

Captivating 4K Images and Vibrant Colors Deepen Immersion

PT-RDQ10 Series harnesses original 1-axis pixel-shifting technology, Smooth Pixel Drive, and 0.66˝ DMD to produce crisp, smooth, and richly detailed 4K (3840 x 2160, 16:9) images. Rich Color Enhancer boosts vibrant red expression while improved black-border adjustment enhances uniformity for seamless edge-blends on curved screens.

Flexibility and Expandability Simplify Integration

Compatibility with ET-DLE020 Ultra-Short-Throw Zoom Lens enhances application flexibility. Optional SLOT NX interface boards, such as 12G-SDI and DisplayPort™, streamline integration while preactivated Geometry Manager Pro*3 upgrade kits and Remote Preview Lite*4 simplify adjustment.

Reliable Low-Maintenance Operation in an All-New Compact Body

Despite its expanded features, PT-RDQ10 Series retains the same compact dimensions as our 1-Chip DLP™ models in an all-new cabinet. Liquid-cooling system inherited from our 3-Chip DLP™ models supports hermetic optical-block sealing, achieving up to 20,000-hour*5 maintenance-free operation, while laser failover circuitry and Backup Input insure against interruptions.

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL].

*2 With Smooth Pixel Drive.

*3 Register your projector at PASS to download free Geometry Manager Pro software for Windows® PC. Mac OS not supported.

*4 Requires Multi Monitoring & Control Software for Windows Ver. 3.0 or later.

*5 Around this time, light output will have decreased by approximately 50 % ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [3], temperature 35 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of particulate matter). Estimated time until light output declines to 50 % varies depending on environment.

Specifications (Tentative)

  PT-RDQ10 PT-RDQ90
Projector type 1-Chip DLP™ projector
DLP™ chip  
Panel size 16.8 mm (0.66 in) diagonal (16:9 aspect ratio)
Display method DLP™ chip x 1, DLP™ projection system
Number of pixels 2716 x 1528 pixels (Images cannot be displayed at this resolution)
Light source Laser diodes
Light output*1*2 10,000 lm 9,000 lm
Time until light output declines to 50 %*3 20,000 hours (NORMAL/QUIET)/24,000 hours (ECO)
Resolution 4K (3840 x 2160 pixels) (With Smooth Pixel Drive)
Contrast ratio*1 10,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [3]. HDMI signal input)
Screen size (diagonal) 1.52–15.24 m (60–600 in) with ET-DLE060/ET-DLE088/ET-DLE158/ET-DLE178*4/ET-DLE258, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:9 aspect ratio
Center-to-corner zone ratio*1 90 %
Lens Powered zoom (throw ratio 1.60–2.58:1), powered focus (for supplied lens; optional lenses also available)
Lens shift
(From the origin point of the lens mounter)
 
Vertical ±60 % with ET-DLE088/ET-DLE158/ET-DLE178*4/ET-DLE258 (+59 %, -40 % with ET-DLE020, ±49 % with ET-DLE060) (powered)
Horizontal ±25 % with ET-DLE088/ET-DLE158/ET-DLE178*4/ET-DLE258 (±24 % with ET-DLE020, ±19 % with ET-DLE060) (powered)
Keystone correction range TBD
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals  
HDMI IN HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input)
MULTI SYNC IN BNC x 1
MULTI SYNC OUT BNC x 1
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input)
LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
USB USB Connector (Type A) x 1 for Cloning/Wireless Module (Output 5 V/500 mA)
DC OUT USB Connector (Type A) x 1 (Output 5 V/2 A)
Expansion Slot Open slot for SLOT NX compatible interface board
Power supply AC 100–240 V, 50/60 Hz
Power consumption TBD TBD
Cabinet materials Molded plastic
Operation noise*1 39 dB (NORMAL/ECO) [TBD] / 35 dB (QUIET) [TBD] 37 dB (NORMAL/ECO) [TBD] / 33 dB (QUIET) [TBD]
Dimensions
(W x H x D)*5
498 x 200 x 538 mm (19 19/32˝ x 7 7/8˝ x 21 3/16˝ ) excluding lens [TBD]
Weight*6 Less than 25 kg (55.1 lbs) excluding lens [TBD]
Operating environment Operating temperature: 0–45 °C (32–113 °F)*7*8, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
  PT-RDQ80
Projector type 1-Chip DLP™ projector
DLP™ chip  
Panel size 16.8 mm (0.66 in) diagonal (16:9 aspect ratio)
Display method DLP™ chip x 1, DLP™ projection system
Number of pixels 2716 x 1528 pixels (Images cannot be displayed at this resolution)
Light source Laser diodes
Light output*1*2 8,000 lm
Time until light output declines to 50 %*3 20,000 hours (NORMAL/QUIET)/24,000 hours (ECO)
Resolution 4K (3840 x 2160 pixels) (With Smooth Pixel Drive)
Contrast ratio*1 10,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [3]. HDMI signal input)
Screen size (diagonal) 1.52–15.24 m (60–600 in) with ET-DLE060/ET-DLE088/ET-DLE158/ET-DLE178*4/ET-DLE258, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:9 aspect ratio
Center-to-corner zone ratio*1 90 %
Lens Powered zoom (throw ratio 1.60–2.58:1), powered focus (for supplied lens; optional lenses also available)
Lens shift
(From the origin point of the lens mounter)
 
Vertical ±60 % with ET-DLE088/ET-DLE158/ET-DLE178*4/ET-DLE258 (+59 %, -40 % with ET-DLE020, ±49 % with ET-DLE060) (powered)
Horizontal ±25 % with ET-DLE088/ET-DLE158/ET-DLE178*4/ET-DLE258 (±24 % with ET-DLE020, ±19 % with ET-DLE060) (powered)
Keystone correction range TBD
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals  
HDMI IN HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input)
MULTI SYNC IN BNC x 1
MULTI SYNC OUT BNC x 1
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input)
LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
USB USB Connector (Type A) x 1 for Cloning/Wireless Module (Output 5 V/500 mA)
DC OUT USB Connector (Type A) x 1 (Output 5 V/2 A)
Expansion Slot Open slot for SLOT NX compatible interface board
Power supply AC 100–240 V, 50/60 Hz
Power consumption TBD
Cabinet materials Molded plastic
Operation noise*1 35 dB (NORMAL/ECO) [TBD] / 31 dB (QUIET) [TBD]
Dimensions
(W x H x D)*5
498 x 200 x 538 mm (19 19/32˝ x 7 7/8˝ x 21 3/16˝ ) excluding lens [TBD]
Weight*6 Less than 25 kg (55.1 lbs) excluding lens [TBD]
Operating environment Operating temperature: 0–45 °C (32–113 °F)*7*8, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.

*2 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL].

*3 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [3], temperature 35 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of particulate matter). Estimated time until light output declines to 50 % varies depending on environment.

*4 ET-DLE178 is equivalent of supplied lens. Availability of ET-DLE178 varies depending on country.

*5 With legs fully retracted, excluding lens and protruding parts.

*6 Average value. May differ depending on the actual unit.

*7 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector.

*8 When optional AJ-WM50 Series wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F).

Accessories

Zoom Lens
ET-DLE020 (0.277–0.296:1) / ET-DLE060 (0.594–0.793:1) /
ET-DLE088 (0.782–1.10:1) / ET-DLE158 (1.08–1.62:1) /
ET-DLE178* (1.60–2.58:1) / ET-DLE258 (2.55–3.82:1)

* ET-DLE178 is equivalent of supplied lens.
Availability of ET-DLE178 varies depending on country.

Note: ET-DLE158 and ET-DLE258 will be available from January 2022.

Ceiling Mount Bracket
ET-PKD130H* (with 6-axis adjustment for high ceilings)
ET-PKD120H* (for high ceilings)
ET-PKD120S* (for low ceilings)

* ET-PKD130H/PKD120H/PKD120S used in combination with
ET-PKD130B (sold separately).

Attachment for Ceiling Mount Bracket
ET-PKD130B
Interface Boards
Interface Board for 12G-SDI (Input x 2, Input/Output x 2)
ET-MDN12G10
Interface Board for 12G-SDI Optical (Input x 1, Input/Output x 1)
ET-MDNFB10
Interface Board for HDMI® (Input x 2)
ET-MDNHM10
Interface Board for DVI-D (Input x 2)
ET-MDNDV10
Interface Board for DisplayPort™ (Input x 2)
ET-MDNDP10
DIGITAL LINK Switcher
ET-YFB200G*

* Not compatible with 4K signals.

Digital Interface Box
ET-YFB100G*

* Not compatible with 4K signals.

Wireless Module
AJ-WM50 Series*

* The suffix at the end of the model number is omitted.
Operating temperature: 0–40 °C (32–104 °F).
Product availability may vary by country or region.

Early Warning Software
ET-SWA100 Series*

* Part number suffix may differ depending on the license type.

NFC Upgrade Kit
ET-NUK10*

* Product availability may vary by country or region.

Wireless Presentation System PressIT
TY-WPS1 (basic set)