Specifications

PT-RQ22K
 
PT-RQ22K
Projector type 3-Chip DLP™ projector
DLP™ chip  
Panel size 22.9 mm (0.9 in) diagonal (16:10 aspect ratio)
Display method DLP™ chip x 3
Pixels 4,096,000 (2560 × 1600) × 3, total of 12,288,000 pixels,
49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON
Refresh rate 240 Hz*1
Light source Laser Diode
Light output 20,000 lm*2 / 21,000 lm (Center)*3
Time until light output declines to 50 %*4 20,000 hours (NORMAL) /24,000 hours (ECO)
Resolution 4K+ (5120 x 3200 pixels) (Quad Pixel Drive: ON)
Contrast*2 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Screen size (diagonal) 1.78–25.4 m (70–1,000 in) with 16:10 aspect ratio
1.78–15.24 m (70–600 in) with the ET-D75LE8 / ET-D3LET80, 16:10 aspect ratio
3.05–15.24 m (120–600 in) with the ET-D75LE95, 16:10 aspect ratio
Center-to-corner uniformity*2 90 %
Lens Optional (no lens included with this model)
Lens shift*5  
Vertical
(from center of screen)
±59 % (±56 % with ET-D75LE6 / ET-D3LEW60, +69 % – +84 % with ET-D75LE95) (powered)
Horizontal
(from center of screen)
±29 % (±19 % with ET-D75LE6 / ET-D3LEW60, ±21 % with ET-D75LE95) (powered)
Keystone correction range Vertical: ±40° (± 22° with ET-D3LEW50, ±28° with ET-D75LE6 / ET-D3LEW60, +5° with ET-D75LE95),
Horizontal: ±15° (0° with ET-D75LE95)
Keystone correction range with optional
ET-UK20 Upgrade Kit
Vertical: ±45° (± 40° with ET-D75LE10 / ET-D3LEW10, ET-D75LE20 / ET-D3LES20, ±22° with ET-D3LEW50,
±28° with ET-D75LE6 / ET-D3LEW60, +5° with ET-D75LE95)
Horizontal: ±40° (±15° with ET-D3LEW50, ET-D75LE6 / ET-D3LEW60, 0° with ET-D75LE95),
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
Installation Horizontal/vertical, free 360-degree installation
Terminals  
SDI 1 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link A), Dual-link 3G-SDI (Link 1),
Quad-link HD-SDI (Link 1), Quad-link 3G-SDI (Link 1)
SDI 2 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link B), Dual-link 3G-SDI (Link 2),
Quad-link HD-SDI (Link 2), Quad-link 3G-SDI (Link 2)
SDI 3 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link A), Dual-link 3G-SDI (Link 1),
Quad-link HD-SDI (Link 3), Quad-link 3G-SDI (Link 3)
SDI 4 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link B), Dual-link 3G-SDI (Link 2),
Quad-link HD-SDI (Link 4), Quad-link 3G-SDI (Link 4)
MULTI PROJECTOR SYNC IN BNC x 1
MULTI PROJECTOR SYNC OUT BNC x 1
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1 for link control
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK/LAN RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant),
100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2
DC OUT USB Type A x 2 (for power supply DC 5 V total of 2 A)
Expansion Slot SLOT 1 / SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible
Power supply AC 200 V–240 V, 8.5 A, 50/60 Hz
(Light output will decrease to approximately 50 % when using the projector with AC 100 V to AC 120 V [9.8A])
Power consumption 1,650 W (0.3 W with Standby Mode set to ECO*6, 4 W with Standby Mode set to NORMAL)
Cabinet materials Molded plastic
Operation noise*2 46 dB
Dimensions (W x H x D) 600 mm x 307 mm*7 x 745 mm ( 23 5/8˝ x 12 3/32˝ x 29 11/32˝ ) ( including protruding parts );
598 mm x 270 mm*8 x 725 mm ( 23 17/32˝ x 10 5/8˝ x 28 17/32˝ ) ( not including protruding parts )
Weight*9 54.0 kg (119 lbs)
Operating environment Operating temperature: 0–45 °C (32–113 °F)*10, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™
   
Terminals PT-RQ22K

*1 Refresh rate varies depending on scanning frequency.

*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*3 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.

*4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.

*5 Lens shift is not supported on the ET-D3LEW50.

*6 When Standby Mode is set to ECO, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal.

*7 With legs at shortest position.

*8 Excluding legs.

*9 Average value. May differ depending on the actual unit.

*10 Operating temperature is 0–40 °C (32–104 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,779 ft) above sea level. When operating in ECO or NORMAL mode at elevations between 0–2,700 m (0–8,858 ft) in ambient temperatures exceeding 40 °C (104 °F), or at elevations between 2,700–4,200 m (8,858–13,780 ft) in ambient temperatures exceeding 25 °C (77 °F), light output may be reduced to protect the projector.