As of June 2019
|Light Output||50,000 lm*2|
|Resolution||Native 4K (4096 x 2160)|
Brilliant Native 4K Images for Absolute Immersion
Achieves Native 4K resolution at 50,000 lumens*2 with red and blue lasers in a dual SOLID SHINE Laser Phosphor drive producing pure, vibrantly emotional color.
Swift Setup with Single-Body Design
Produces 50,000 lm*2 from the same footprint as Panasonic’s 30,000-lm-class 3-Chip DLP™ laser models. Compact all-in-one body simplifies transport and installation for fast setup and adjustment.
Reliable Operation for Mission-Critical Applications
Highlighting a “dualized” design concept are dual solid-state lasers and backup video inputs.
Hermetically sealed optics and filterless design contribute to 20,000 hours*3 maintenance-free projection even in severe conditions.
*1 For laser-phosphor projectors in the single-body 50,000-lumens-class or higher, as of June 2019.
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
*3 At this time, brightness will have decreased to approximately 50 % of its original level (Dynamic Contrast Mode ). Panasonic recommends cleaning or checkup at point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.
|Projector type||3-Chip DLP™ projector|
|Panel size||35.1 mm (1.38 in) diagonal (17:9 aspect ratio)|
|Display method||DLP™ chip x 3, DLP™ projection system|
|Number of pixels||8,847,360 (4096 x 2160) pixels x 3, total of 26,542,080 pixels|
|Light source||Laser diodes (Blue LD, Red LD)|
|Light output*1||50,000 lm|
|Time until light output declines to 50 %*2||20,000 hours (NORMAL)|
|Resolution||Native 4K (4096 x 2160 pixels)|
|Contrast ratio*1||20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)|
|Screen size (diagonal)||2.54–25.4 m (100–1,000 in) with new optional lens for PT-RQ50K, 17:9 aspect ratio (depending on lens)|
|Center-to-corner zone ratio*1||TBD|
|Lens||New optional lenses for PT-RQ50K (no lens included with this model)|
(from center of screen)
(from center of screen)
|Keystone correction range||TBD|
|Installation||Horizontal/vertical, free 360-degree installation|
|MULTI PROJECTOR SYNC IN||BNC x 1|
|MULTI PROJECTOR SYNC OUT||BNC x 1|
|SERIAL IN||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|SERIAL OUT||D-sub 9-pin (male) x 1 for link control|
|REMOTE 1 IN||M3 x 1 for wired remote control|
|REMOTE 1 OUT||M3 x 1 for link control|
|REMOTE 2 IN||D-sub 9-pin (female) x 1 for external control (parallel)|
|DIGITAL LINK||RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2|
|LAN||RJ-45 x 1 for network, 10Base-T/100Base-TX, compatible with Art-Net, PJLink™ (Class 2)|
|USB||USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/2 A)|
|Expansion Slot 1||Interface Board for 12G-SDI (ET-MDN12G10) supplied|
|Expansion Slot 2||Optional interface boards, SLOT NX compatible|
|Power supply||AC 200–240 V, 50/60 Hz; AC 100–120 V, 50/60 Hz (Brightness restricted with voltage lower than 200 V)|
|Cabinet materials||Metal (Partly Plastic Mold)|
|Dimensions (W x H x D)||1,070 x 445 x 720 mm (42 1/8˝ x 17 17/32˝ x 28 17/32˝ )|
|Weight*3||Under 130 kg (287 lbs)|
|Operating environment||Operating temperature: 0–45 °C (32–113 °F)*4, operating humidity: 10–80 % (no condensation)|
|Applicable software||Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™|
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
*2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast , under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
*3 Average value. May differ depending on the actual unit.
*4 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector.
- Zoom lens
- ET-D3QW300 (1.13-1.72:1)
- Interface Board for 12G-SDI Input
- Interface Board for HDMI® (HDCP 2.2) Input (Input x 2)
- Interface Board for DVI Input
- Interface Board for 3G-SDI Input
- Interface Board for DiplayPort™
- DIGITAL LINK Switcher
Note: ET-YFB200G is not compatible with 4K signals.
- Digital Interface Box
Note: ET-YFB100G is not compatible with 4K signals.
- Early Warning Software
- ET-SWA100 Series*
Note: Part number suffix may differ depending on the license type.
* Multi Monitoring & Control Software Ver. 2.0 or later is required.
Please download from the following website: