LARGE VENUE3-Chip DLP™ Projector

PT-RQ50K

 
PT-RQ50K
Projector type 3-Chip DLP™ projector
DLP™ chip  
Panel size 35.1 mm (1.38 in) diagonal (17:9 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Number of pixels 8,847,360 (4096 x 2160 pixels) x 3
Light source Laser diodes (Blue LD, Red LD)
Light output 50,000 lm*1 / 51,000 lm (Center)*2
Time until light output declines to 50 %*3 20,000 hours (NORMAL)
Resolution Native 4K (4096 x 2160 pixels)
Contrast ratio*1 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Screen size (diagonal) 2.54–38.1 m (100–1,500 in) with new optional lens for PT-RQ50K, 17:9 aspect ratio
Center-to-corner zone ratio*1 90 %
Lens New optional lenses for PT-RQ50K (no lens included with this model)
Lens shift  
Vertical
(from center of screen)
±45 % (±25 % with ET-D3QT600, ±30 % with ET-D3QT700/ET-D3QT800, ±40 % with ET-D3QW300) (powered)
Horizontal
(from center of screen)
±16 % (±8 % with ET-D3QT600, ±10 % with ET-D3QT700/ET-D3QT800, ±14 % with ET-D3QW300) (powered)
Keystone correction range Vertical: ±40 ° (±28 ° with ET-D3QW300), Horizontal: ±40 ° (±15 ° with ET-D3QW300)
Installation Horizontal/vertical, free 360-degree installation
Terminals  
MULTI PROJECTOR SYNC IN BNC x 1
MULTI PROJECTOR SYNC OUT BNC x 1
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1 for link control
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
LAN RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
DC OUT USB Connector (Type A) x 2 for power supply only (DC 5 V, total of 2 A)
USB USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series) / USB Memory Stick
Expansion Slot 1 Interface Board for 12G-SDI (ET-MDN12G10) supplied
Expansion Slot 2 Optional interface boards, SLOT NX compatible
Power supply AC 200–240 V, 50/60 Hz; AC 100–120 V, 50/60 Hz
Power consumption 4,100 W (AC 100–120 V: 1,100 W, Standby Mode: 6 W)
Cabinet materials Fabricated metal and molded plastic
Operation noise*1 52 dB
Dimensions (W x H x D) 720 x 445 x 1,070 mm (28 11/32˝ x 17 17/32˝ x 42 1/8˝ ) (excluding handle, adjuster feet, and other protruding parts)
Weight*4 Approx. 126 kg (278 lbs) (without lens)
Operating environment Operating temperature: 0–45 °C (32–113 °F)*5*6*7, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.

*3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.

*4 Average value. May differ depending on the actual unit.

*5 The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft).

*6 When optional AJ-WM50 wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F).

*7 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector.