Specifications

PT-RZ21K Series

Large-Venue3-Chip DLP™ Projectors

PT-RZ21K SeriesPT-RZ21K / PT-RS20K

 
PT-RZ21K

PT-RS20K
Power supply AC 200 V–240 V, 7.7 A, 50/60 Hz
(Light output will decrease to approximately 50 % when using the projector with AC 100 V to AC 120 V [9.6 A].)
AC 200 V–240 V, 7.7 A, 50/60 Hz
(Light output will decrease to approximately 50 % when using the projector with AC 100 V to AC 120 V [9.6 A].)
Power consumption 1,510 W (0.3 W with Standby Mode set to ECO*1, 4 W with Standby Mode set to NORMAL) 1,510 W (0.3 W with Standby Mode set to ECO*1, 4 W with Standby Mode set to NORMAL)
DLP™ chip    
Panel size 24.4 mm (0.96 in)
diagonal (16:10 aspect ratio)
24.1 mm (0.95 in)
diagonal (4:3 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system DLP™ chip x 3, DLP™ projection system
Pixels 6,912,000 (1920 x 1200 x 3) pixels 4,410,000 (1400 x 1050 x 3) pixels
Refresh Rate 120 Hz*2 120 Hz*2
Lens Optional (no lens included with this model) Optional (no lens included with this model)
Light source Laser Diode (Laser class: Class 1)(Class 3R for US models), Light source life: 20,000 hours (NORMAL Mode, brightness decreases to approx. 50 %) / 24,000 hours (ECO Mode, brightness decreases to approx. 50 %) Laser Diode (Laser class: Class 1)(Class 3R for US models), Light source life: 20,000 hours (NORMAL Mode, brightness decreases to approx. 50 %) / 24,000 hours (ECO Mode, brightness decreases to approx. 50 %)
Screen size (diagonal) 1.78–25.4 m (70–1,000 in)
with 16:10 aspect ratio
1.78–15.24 m (70–600 in)
with the ET-D75LE8, 16:10 aspect ratio
3.05–15.24 m (120–600 in)
with the ET-D75LE95, 16:10 aspect ratio
1.78–25.4 m (70–1,000 in)
with 4:3 aspect ratio
1.78–15.24 m (70–600 in)
with the ET-D75LE8, 4:3 aspect ratio
3.05–15.24 m (120–600 in)
with the ET-D75LE95, 4:3 aspect ratio
Brightness 21,000 lm (Center)*3 / 20,000 lm*4 21,000 lm (Center)*3 / 20,000 lm*4
Center-to-corner uniformity 90 % 90 %
Contrast 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution 1920 x 1200 pixels 1400 x 1050 pixels
RGB fH: 15−100 kHz, fV: 24−120 Hz, dot clock: 162 MHz or less fH: 15−100 kHz, fV: 24−120 Hz, dot clock: 162 MHz or less
Video/YC fH: 15.73 kHz, fV: 59.94 Hz (NTSC/NTSC4.43/PAL-M/PAL60),
fH: 15.63 kHz, fV: 50 Hz (PAL/PAL-N/SECAM)
fH: 15.73 kHz, fV: 59.94 Hz (NTSC/NTSC4.43/PAL-M/PAL60),
fH: 15.63 kHz, fV: 50 Hz (PAL/PAL-N/SECAM)
Optical axis shift*5
(from center of screen)
   
Vertical ±55 % (±44 % with ET-D75LE6,
+68 % − +78 % with ET-D75LE95) (powered)
±50 % (±40 % with ET-D75LE6,
+67 % − +71 % with ET-D75LE95) (powered)
Horizontal ±20 % (±15 % with ET-D75LE6,
±12 % with ET-D75LE95) (powered)
±30 % (±20 % with ET-D75LE6,
±8 % with ET-D75LE95) (powered)
Keystone correction range Vertical: ±40° (± 22° with ET-D75LE50, ±28° with ET-D75LE6),
Horizontal: ±15°
Vertical: ±40° (± 22° with ET-D75LE50, ±28° with ET-D75LE6),
Horizontal: ±15°
Keystone correction range with
optional upgrade kit (ET-UK20)
Vertical: ±45° (± 40° with ET-D75LE10/20,
±22° with ET-D75LE50, ±28° with ET-D75LE6), Horizontal: ±40° (±15° with ET-D75LE50/6),
Up to a total of ±55° during simultaneous horizontal and vertical correction
Vertical: ±45° (± 40° with ET-D75LE10/20,
±22° with ET-D75LE50, ±28° with ET-D75LE6), Horizontal: ±40° (±15° with ET-D75LE50/6),
Up to a total of ±55° during simultaneous horizontal and vertical correction
Installation Horizontal/vertical, free 360-degree installation Horizontal/vertical, free 360-degree installation
Cabinet materials Molded plastic Molded plastic
Dimensions (W x H x D) 598 × 270 × 725 mm (23 17/32˝ x 10 5/8˝ x 28 17/32˝) (not including protruding parts) 598 × 270 × 725 mm (23 17/32˝ x 10 5/8˝ x 28 17/32˝) (not including protruding parts)
Weight 49.0 kg (108 lbs) 49.0 kg (108 lbs)
Operation noise*4 46 dB 46 dB
Operating environment Operating temperature: 0–50 °C (32–122 °F)*6; Operating humidity: 10–80 % (no condensation) Operating temperature: 0–50 °C (32–122 °F)*6; Operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,
Geometry Manager Pro Software (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Upgrade Kit), Smart Projector Control
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,
Geometry Manager Pro Software (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Upgrade Kit), Smart Projector Control
     
Terminals PT-RZ21K/
RS20K

*1 When Standby Mode is set to ECO, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal.

*2 Refresh rate varies depending on scanning frequency.

*3 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*4 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*5 Optical axis shift is not supported on the ET-D75LE50.

*6 Operating temperature is 0-45 °C (32-113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,779 ft) above sea level. When operating in ECO or NORMAL mode at elevations between 0–2,700 m (0–8,858 ft) in ambient temperatures exceeding 35 °C (95 °F), or at elevations between 2,700–4,200 m (8,858–13,780 ft) in ambient temperatures exceeding 25 °C (77 °F), light output may be reduced to protect the projector.