Compact 1-Chip DLP™ Laser Projectors Bring High Brightness and Simple Flexibility to Exhibition SpacesCompact 1-Chip DLP™ Laser Projectors Bring High Brightness and Simple Flexibility to Exhibition Spaces

Preliminary Product1-Chip DLP™ Projectors

PT-RZ790 SeriesPT-RZ790 / PT-RZ790L / PT-RZ690 / PT-RZ690L

As of February 2020

  PT-RZ790 PT-RZ790L PT-RZ690 PT-RZ690L
Light Output 7,000 lm*1/7,200 lm (Center)*2 6,000 lm*1/6,200 lm (Center)*2
Resolution WUXGA
Lens Lens supplied Without lens Lens supplied Without lens

Features

Bright, Color-Rich Images in Any Environment

The PT-RZ790 Series delivers the brightness, resolution, and color that designers need to enhance exhibits with bright, bold, and vivid pictures. SOLID SHINE Laser and Quartet Color Harmonizer enhance color-depth and white-balance accuracy for arrestingly realistic pictures even in well-lit spaces.

Light, Quiet, Compact Projectors are Easy to Install

Projectors support our 1-Chip DLP™ lenses and 4K signal input*3 via HDMI® and DIGITAL LINK, adapting to your space with 23.2 kg*4 body and 36 dB operation in Normal Mode. Smart Projector Control app enhances efficiency with On/Off function, lens adjustment, touchscreen OSD navigation, and projection auto-focusing using your smartphone camera*5.

Proven SOLID SHINE Laser Reliability

Hermetically sealed DMD block, shielded laser drive, and new filterless cooling system eliminate the hassle of maintenance for 20,000 hours*6 of continuous projection, while brightness ramp and color uniformity remain linear. For extra insurance, Backup Input*7 switches to a failback if primary video is interrupted.

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.

*3 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®.

*4 Including standard lens.

*5 Projector auto-focus may not be supported on some mobile devices.

*6 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, NORMAL Mode, Dynamic Contrast [ON], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until brightness decreases to 50 % will vary depending on environment and usage conditions. Parts other than the light source may require replacement before 20,000 hours, and checkup is recommended around this time.

*7 Combination of primary/backup input terminals is fixed. Backup Input function enabled when input signal to primary/backup terminals is the same.

Specifications (Tentative)

  PT-RZ790/RZ790L PT-RZ690/RZ690L
Projector type 1-Chip DLP™ projector
DLP™ chip  
Panel size 17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
Display method DLP™ chip x 1, DLP™ projection system
Number of pixels 2,304,000 (1920 x 1200 pixels)
Light source Laser diodes
Light output 7,000 lm*1/7,200 lm (Center)*2 6,000 lm*1/6,200 lm (Center)*2
Time until light output declines to 50 %*3 20,000 hours (NORMAL)/24,000 hours (ECO)
Resolution 1920 x 1200 pixels
Contrast ratio*1 10,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON)
Screen size [diagonal] 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055,
2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio
Center-to-corner zone ratio*1 90 %
Lens PT-RZ790: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm
PT-RZ790L: Optional powered zoom/focus lenses
PT-RZ690: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm
PT-RZ690L: Optional powered zoom/focus lenses
Lens shift*4
(From the origin point of the lens mounter)
 
Vertical +50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered)
Horizontal +30 %, -10 %
(+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered)
Keystone correction range Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035),
Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020)
Keystone correction range with optional ET-UK20 Upgrade Kit Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055),
Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055)
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals  
SDI IN BNC x 1: 3G/HD/SD-SDI input
HDMI® IN HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K signal input*5)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
RGB 1 IN RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR/YC/VIDEO
RGB 2 IN D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR
SERIAL/MULTI PROJECTOR SYNC IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL/MULTI PROJECTOR SYNC OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible, 4K signal input*5
LAN RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
Power supply AC 100–240 V, 50/60 Hz
Power consumption TBD
Cabinet materials Molded plastic
Operation noise*1 36 dB
Dimensions (W x H x D) PT-RZ790: 498 x 200*6 x 581 mm (19 19/32 ̋ x 7 7/8 ̋ *6 x 22 7/8 ̋ )
(with supplied lens)
PT-RZ790L: 498 x 200*6 x 538 mm (19 19/32 ̋ x 7 7/8 ̋ *6 x 21 3/16 ̋ ) (without lens)
PT-RZ690: 498 x 200*6 x 581 mm (19 19/32 ̋ x 7 7/8 ̋̋ *6 x 22 7/8 ̋ ) (with supplied lens)
PT-RZ690L: 498 x 200*6 x 538 mm (19 19/32 ̋ x 7 7/8 ̋ *6 x 21 3/16 ̋ ) (without lens)
Weight*7 PT-RZ790: Approx. 23.2 kg (51.1 lbs) (with supplied lens)
PT-RZ790L: Approx. 22.4 kg (49.4 lbs) (without lens)
PT-RZ690: Approx. 23.2 kg (51.1 lbs) (with supplied lens)
PT-RZ690L: Approx. 22.4 kg (49.4 lbs) (without lens)
Operating environment TBD
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

*2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.

*3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [ON], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.

*4 Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE035.

*5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®.

*6 Excluding legs.

*7 Average value. May differ depending on the actual unit.

Accessories

Fixed-Focus Lens
ET-DLE030 (0.380:1) / ET-DLE035 (0.380:1) /
55 (0.785:1)
Zoom Lens
ET-DLE020 (0.280–0.299:1) / ET-DLE060 (0.600–0.801:1) /
ET-DLE085 (0.782–0.977:1) / ET-DLE105 (0.978–1.32:1) /
ET-DLE150 (1.30–1.89:1) / ET-DLE170* (1.71–2.41:1) /
ET-DLE250 (2.27–3.62:1) / ET-DLE350 (3.58–5.45:1) /
ET-DLE450 (5.36–8.58:1)

* The ET-DLE170 is equivalent of supplied lens.
The availability of the ET-DLE170 varies depending on the country.

Ceiling Mount Bracket
ET-PKD130H (6-axis, for high ceiling)
ET-PKD120H (for high ceiling)
ET-PKD120S (for low ceiling)

Note: Use ET-PKD120H, ET-PKD120S,and ET-PKD130H in combination
with ET-PKD130B.
ET-PKD130H is recommended when used with ET-DLE030/ET-DLE035.

Projector Mount Bracket
ET-PKD130B
DIGITAL LINK Switcher
ET-YFB200G

Note: ET-YFB200G is not compatible with 4K signals.

Digital Interface Box
ET-YFB100G

Note: ET-YFB100G is not compatible with 4K signals.

Geometry Manager Pro Software Upgrade Kit
ET-UK20
Auto Screen Adjustment Upgrade Kit
ET-CUK10/ET-CUK10P
Early Warning Software
ET-SWA100 Series

Note: Part number suffix may differ depending on the license type.

* Multi Monitoring & Control Software Ver. 2.0 or later is required.
Please download from the following website:
https://panasonic.net/cns/projector/download/application/multiprojector/