Turnkey Solution for Multi-Window PresentationsEvolution Reaches a New Peak

All-inOne Connectivity

By combining the ET-YFB100G with a DIGITAL LINK-ready projector, video, audio and control signals can be transmitted over a single cable. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.

DEGITAL LINK
EXPAND ALL

Transmits Digital Signals with a Single Cable

  • ・ Equipped with a DIGITAL LINK output terminal. Allows transmission of HDMI, uncompressed HD digital video, audio and control signals (Ethernet, RS -232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher.
  • ・ Abundant input terminals, including two sets of HDMI and RGB inputs.
  • ・ A separate audio output enables sound to be output when the projector power is turned off.
  • ・ ET-YFB100G input can be selected with the remote control of a Panasonic projector with DIGITAL LINK compatibility*.

Image showing the DIGITAL LINK in use

Image showing the DIGITAL LINK in useImage showing the DIGITAL LINK in use

* See the DIGITAL LINK-ready Panasonic Projectors.

Outputting High-Quality Images in Their Optimal Form

  • ・ Digital transmission allows clear image and sound quality without any degradation even over long distances.
  • ・ Digital Cinema Reality converts interlaced motion image signals into beautifully smooth progressive images.
  • ・ PC signals are automatically resized and output in the optimal resolution to match the projector panel resolution.*
  • ・ The Auto Setup function automatically distinguishes the input signal and adjusts it to output the optimal angle of view.
  • ・ 3D video format transmission is supported (Pass Through mode only)

* The output setting for the ET-YFB100G should be set to AUTO. This scaling/resizing function does not support some formats.

Convenient Functions Expand System Configuration Potential

  • ・ DIGITAL LINK is an original function added to HDBaseT™ technology.
    Signals from the ET-YFB100G can also be relayed to a non-DIGITAL LINK-ready projector by using another manufacturer's equipment based on the same technology.* For details on other manufacturers' equipment, see the list of tested compatible equipment.

Tested Equipment Compatible with the Digital Interface Box

  • ・ Brackets included for various installation needs, including server rack (EIA standards) mounting.
Mounting brackets attachedMounting brackets attached
  • ・ Eco mode** automatically stops the DIGITAL LINK output when no input signal is detected
  • ・ Closed caption compatible

* The output setting for the ET-YFB100G should be set to AUTO. This scaling/resizing function does not support some formats.

** When using Eco mode, time and other menu settings must be made.

Note: HDBaseT™ is a trademark of the HDBaseT Alliance.

YouTube

What’s DIGITAL LINK?
Tested Compatible Equipment
Professional Displays Global Site
PASS
PASS
PASS