Installation examples

Factory Line 400

[Factory Line 400] Line with heavy-load large forming machines: Branching is made directly to individual forming machines using the compact terminal plugs with breaker.
Recommended for heavy load manufacturing lines with machine tools, press machines and drying machines.

[Factory Line 200] Power supply for large machine tools: Different types of terminal plugs for branching are used according to the load (e.g., terminal plugs with or without breaker, with motor breaker or with leakage breaker).

[Factory Line 100] Power supply for high precision die processing machines: Reeler outlet plugs are mounted on the lower 2P20A circuit of Factory Line 100 as handy power source.

[Factory Line 100] Automotive assembly line: The power supply for both lighting and electrical outlets can be obtained simultaneously from a single duct.
This is an automotive FMS line on which different car models are assembled at the same time, and various power supplies are needed, such as for lighting and large-capacity electrical outlets.
This is the perfect place for application of the Factory Line 100, which is capable of simultaneously providing different three-phase and single-phase power supplies.

[Factory Line 100] Electrical component assembly line: Since the takeoffs for power can be freely placed, there are no limitations on where to place equipment when installing.
This is an example of use of Factory Line 100 on a newly installed line.
If the factory line for electrical outlets and machinery power is installed next to the lights, then wherever assembly equipment is placed, 3-phase and single-phase power will be close at hand.

[Factory Line 100] Sewing line: In addition to complete freedom in layout changes, safety in the workplace is greatly improved.
In a clothing factory, the positions of the sewing machines have to be changed frequently to accommodate changes in the season and in designs. By installing the large-capacity Factory Line 100 on the ceiling, not only can the sewing machines be placed in any location, but the danger of tripping on cables strewn across the floor is also eliminated.

[Factory Line 100] Plastic molding factory: 3-phase power supply for molding machines and single-phase power supply for handy lights are accommodated in a single duct.
Factory Line allows you to obtain all power supplies from the ceiling. You can keep the floor clean and move the wagons smoothly.

[Factory Line 100] Metalwork line: Three-phase and single-phase power supplies can both be obtained easily, and the appearance of the factory is also improved.
With lines consisting of stand-alone type machine tools, there has always been the tendency for power cords and cables to be strewn about in disorder. With the Factory Line 100, this problem is completely eliminated. The cords can be kept to the minimum length required, and this also contributes to improving the appearance of the factory.

[Factory Line 30] Electronic component assembly line: Even if the layout of the line is changed, power supply for lighting and small drive loads can be adapted immediately.
New product development is an extremely important part of the electronic component industry, so changes must frequently be made in the layout of the production line.
Here, the Factory Line 30 is installed across the entire ceiling, thus making it possible to obtain the power supply for fluorescent lighting fixtures and small drive loads at the optimum location in accordance with changes in the line layout.

[Factory Line 30] Large stores: Lighting and electrical outlets at the same time.
Design coordinates well with lightweight frame ceilings.
This is an example of using the Factory Line 30 in a large store having a lightweight frame ceiling of the kind that is currently so common. Not only is the Factory Line 30 extremely functional, providing two single-phase power supply circuits from a single duct, but its design also coordinates well with the ceiling. The Factory Line goes well with the decor and atmosphere of modern-looking stores.

[Factory Line 30] Schools (practical rooms): The cables are not drawn on the floor, which can contribute to the safe work environment.
In this case, Factory Line 30 is adopted as power supply for soldering irons used in the practical room.
Because two circuits can be obtained from one duct, it is possible to use many pieces of soldering irons. Also the cables are not drawn on the floor making cleaning after the work easy.

[Factory Line 30] Offices: Power supply for VDTs and office automation equipment.
Expansion and relocation is possible as needed.
Securing power supplies is often left behind when considering office automation configuration.
Factory Line 30 suits best to such a situation.
You can obtain the power from any point and make expansion and relocation easily. Even if grounding is necessary at the desired point, it is possible to draw out the power at the same time as the grounding wire.

[Factory Line 20] Power supply for office automation equipment: In this case, Factory Line 20 is adopted in a production room of printing company.
Terminal plugs for branching are drawn down along the wall surface making a better view of the ceiling.